Hello!
This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful.
Support page index - Contains a directory of existing product support pages, support pages contain li...
Hi Attempting to monitor CBS350 switches via SNMP v2 in PRTG. PRTG's default SNMP Traffic sensor works, but 'System Health' does not. I was unable to find a suitable MIB to import to PRTG for CPU/memory usage, FAN on/off and temperature.These object ...
I'm attempting to issue a certificate to the Cisco Business Dashboard (which our company recently purchased). I filled out the CSR form included with the dashboard in the certificates section of the settings, and everything seems to go OK until I try...
Hello All,Having really tough time to add new cisco switch CBS350 into newly setup dashborad, also not seeing enough document around it. Please help.. seeing below error Dashboard Status: Disconnected ( certificate-error - application verification fa...
I updated my CBS350 switches to 3.3.0.16 prior to adding to the business dashboard. The update has removed the organization and network fields from Cisco Business Dashboard settings area. Now when I add a switch, it joins the wrong organization rathe...
I couldn't find this anywhere on the forum already; if I missed it please post the link. I just attempted to install a CBD Probe out at a location and received the error in the title. I know that this isn't an SSL thing because the Cisco Business Da...
llo! We're facing some issues regarding Port Security with Max-Addresses on a SG550X stack with 3 switches. #sh verActive-image: flash://system/images/cbs350_2.5.7.85.binVersion: 2.5.7.85MD5 Digest: e766e20b0d080a72db3ec00888d595a0Date: 18-Jan-2021Ti...
Hello all, we are installing several SX350 devices and configure them with Business Dashboard via SNMP and http(s). We had to restart our Hypervisor to install Updates and Hardwareupgrades, after each restart of the Dashboard VM a Job, created by Sys...
Dear All,I have upgraded firmware on 3 CBS 350-48P-4G switch (image_cbs_ros_3.1.0.57_release_cisco_signed).after upgrade, I have rebooted to load new Image and all work fine. after some days, 2 switch have this issue: from http page after insert cred...
Hi All! We got a problem with discovering a SG350X (stack with 4 switches) for the Cisco Business Dashboard.The FindIT Network Probe is activated on the switch itself. When we start the refresh in inventory it find itself as a device (switch, model, ...
I have 2 AP's (CBW240AC-E and CBW140AC-E) which are connected to CBD using pnp connect. When claiming the devices it is mandatory to select an image from CBD to use on the device. Unfortunately the devices are stuck on provisioning.The provisioning l...
Dear, Where to find the part code to order the CBD software (with 25 device licenses included, as datasheet and Q&A stipulate ) ?I can't find it in the datasheet ( https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/business-da...
Hey everyone, I was configuring an IE2000 just now and after I finished I reloaded and saved config to test if everything worked properly. When the switch rebooted I was unable to login for whatever reason. I'm now trying to simply factory reset the ...