Cisco Catalyst Center

My DNAC version 1.3 cannot configure Layer 2 hand-off on Border node (C9500-24Y4C) that showed “Provisioning failed due to invalid parameter. Border L2 hand-off is not supported on device XXXX. I tried to create new IP Pool, re-provision Border node ...

CAN ANYONE HELP ME to DRAW THE NETWORK TOPOLOGY IN CISCO PACKET TRACER? I NEED JUST THE DIAGRAM OF THE CONNECTION.  Project  BNK: Network Requirements: BNK Bank has 4 branches spread out in the city. Main Motijheel Branch--Consists of 200 hosts.Dhamo...

hi experts, one question about Application Healthin the dna assurance part, what do we need to see information about applications for the wireless clients?because the wlc it's in flex mode, we only see clients information about the time the time the ...

I wanted to see if anyone has enabled the App Experience feature in DNA Center? What kind of visibility do you have? I have a SDA fabric deployed in a campus environment and would like to gather further insight into popular application performance (O...

Hi.We are looking for 2 more senior network engineers to join our team. We are a Cisco only partner and the fastest growing in Western Australia.Ideally you are CCIE or CCNP certified (CCNP certifications coupled with a depth of industry experience i...

Hello everyone,           I have a question about DNAC that needs to be consulted. There are multiple Catalyst 9500 switches in the network. They are configured through DNAC to allow multiple switches to have the same distributed gateway address (for...

Dear All, I am checking to create a certificate for DNAC (System Settings - Certificate). I usually use this guide "Cisco Digital Network Architecture Center Security Best Practices Guide" (https://www.cisco.com/c/en/us/td/docs/cloud-systems-manageme...

Hi all Is there any way DNAC can pull detailed reports on the radio types of the clients connected to it, ie, 802.11ac vs 802.11n. Doing it via scripting hasnt really worked out and i was hoping that DNAC held this information somewhere.  I've gone t...

I have a fully working SDA Fabric and the edge nodes were provisioned using lan automation from DNAC. Now I connected my Edge with port 1/0/24 to my border and control node on port 1/0/1. Now I want to move the uplink on border side to port 1/0/24 as...

We’re looking for network operators and engineers to complete a 2-minute icon preference study. The icon choice will help us better represent information on a Cisco software product.   Click here: https://ciscoux.az1.qualtrics.com/jfe/form/SV_6saOh5...

Hello Team, Recently I have faced a problem during the upgrade of Nexus 7K from 6.2.8a to 6.2.16. When reload the admin VDC, after changing boot-path from 6.2.8a to 6.2.16 ,its returning previous image (6.2.8a), not taking the new one (6.2.16). But i...

Buenas tardes,Tengo una consulta, conecté un sfp a mi Switch Cisco 3850 y me apareció éste log:%PM-4-ERR_DISABLE: gbic-invalid error detected on Gi1/1/1, putting Gi1/1/1 in err-disable stateA que se debe o que se debe hacer en ese caso? Saludos

Hi everyone, In eBGP, is it possible to distribute routes across multiple AS ? Like this : AS1---AS2---AS3 Is it possible to redistribute AS1 routes to AS3 ? Romain

The go daddy certificate is installed on a Cisco 2900. I need to install a new wild card certificate. I have never installed a certificate or undated one. I need to know the step by step procedure with CLI syntax. I am just getting started in the rea...