Collaboration Knowledge Base

This document was generated from CDN thread Created by: xiaobo jia on 22-12-2011 02:11:01 AM constant web warning event log as:"11:38:37.144 WEB_PAGES    Warning Valid Session cookie from different IP than the one we supplied the cookie to, disallowi...

This document was generated from CDN thread Created by: Kari Teffeau on 21-12-2011 10:42:39 PM First question:The c90 allows you to do 3 multi-site calls, why are there 4 participant blanks in the example touch panel file - just curious (my client as...

Subject: RE: mcu api: participant.add Replied by: David Vrtin on 27-08-2012 10:33:26 AMAnother version of same problem is: if we add pre-configured participants with API with by_address (and such participants are not visible on MCU web interface), th...

This document was generated from CDN thread Created by: Marko Laurits on 15-12-2011 03:54:16 PM Hello,As I understand, Tandberg PHD 1080 cameras are driven by protocol that is very similar to Sony Visca. ClearOne RAV and Interact mixers are able to c...

This document was generated from CDN thread Created by: David Mongelli on 14-12-2011 05:54:36 PM I'm interested in testing the Content Server integration into Microsoft sharepoint. The admin guide refers to TCSWebparts.dll which needs to be copied on...

This document was generated from CDN thread Created by: Justin Ferello on 13-12-2011 07:06:52 PM We have gotten several inquiries with regards to this issue.  Customer defines a layout using TC Console, they make this their default layout for every s...

This document was generated from CDN thread Created by: Twelve Li on 11-12-2011 08:31:33 PM Hi,I am using Crestron controller to control C90 with serial command. We have an application to have video source selection, C90 Layout selection and Monitor ...

This document was generated from CDN thread Created by: Steve Hughes on 09-12-2011 02:55:39 PM we have been hanving a problem here with using the EX90 as a local PC discplay.  Approx once per day the screen goes totally black and displays nothing, th...

This document was generated from CDN thread Created by: Denis Moiseenko on 07-12-2011 09:16:59 PM Hi All!Could you tell me how to connect to the Tandberg codecs C-series, through  the serial port? I tried to connect to oure C-20 codec using HyperTerm...

This document was generated from CDN thread Created by: Andrey Zatishniy on 07-12-2011 09:03:43 AM Hello dears!One task i 've got with e20 and Edge95 communication. Customer tells e20 is not able to see video from Edge 95. These are 2 branches in one...

Subject: RE: C-60/90 with Precision HD Cams Presets Failure Replied by: jarrod sousa on 20-07-2012 05:41:03 PMI had the same issue with a Profile Dual 65 running TC5.1.2 software.  after upgrading to TC 5.1.3 the problem went awaySubject: RE: C-60/90...

This document was generated from CDN thread Created by: Tim Skaja on 02-12-2011 05:33:40 PM I am attempting to add participants to an already running conference. I read the existing participant list, and add the additional participants and call saveC...

This document was generated from CDN thread Created by: noni 0 on 30-11-2011 01:15:45 PM I have succeeded in setting up a SIP trunk between the Mitel 3300 controller (IP switch) and our VCS-C and the two devices are presently neighbours. I am finding...

This document was generated from CDN thread Created by: ian Craigie on 29-11-2011 03:24:18 AM Duet Module = 1.3.2 TC20 F/W = TC4.1.0247017Continually getting a socket failure message then the module reinits. (18:16:05)::  (IPConnectionFacade) ERROR: ...

This document was generated from CDN thread Created by: Steven Amos on 29-11-2011 03:14:30 AM I was looking at the duet module for this device and see that I can add a virtual layout to a local output or a remote output, but only up to the 4th call. ...