Collaboration Knowledge Base

This document was generated from CDN thread Created by: Arnaud EVAIN on 11-05-2011 03:35:19 PM Hi,I would like to know if there would be a list of all the variables available we could use when formating email templates.We use the one already used in ...

This document was generated from CDN thread Created by: Niels Kaae on 11-05-2011 10:01:14 AM Hi.Does anyone have a guide to integrate with MS LYNC server?Kind regardsNielsSubject: RE: Integration with OCS 2010 MS lync server Replied by: Steve kapinos...

This document was generated from CDN thread Created by: abdulrahman Bin Gursain on 11-05-2011 10:00:42 AM hi alli have probem,    i forget password of edge 95  taht  mean i can't access codec through http and telnet can any one help me to solve this ...

This document was generated from CDN thread Created by: Graeme Kay on 10-05-2011 05:05:12 PM We have been experiencing very audible echo's using C20s and C40s connected to newer, feature enriched displays. We have tested these screen with Polycom VC'...

This document was generated from CDN thread Created by: Andy Vitturini on 09-05-2011 04:25:47 PM Hi, Apologies if this is a silly question. I have a C60 Dual screen unit and would like to fully utilise both screens. If I dial out directly from the un...

This document was generated from CDN thread Created by: Randy Ott on 06-05-2011 07:43:23 PM 1. Do the C series CODECs support FTP file transfer? I would like to re-load the LOGO file based on user logon to the control system.  I will have access to t...

Subject: RE: Dismissing Missed calls from the OSD from the AMX Replied by: Steven Amos on 24-07-2012 11:30:34 AMyou can turn the OSD off. Not sure if this is what you are looking to do but this may help.This document was generated from CDN thread Cre...

This document was generated from CDN thread Created by: Lee Heath on 04-05-2011 03:23:14 PM Hello, Does anyone one know if it's possible to link a generic 1080p camera with HDMI output to a C20 codec?Subject: RE: Generic Camera to C20 codec Replied b...

This document was generated from CDN thread Created by: henry kyburg on 03-05-2011 09:30:10 PM We have demonstrated to a Tandberg rep that the input 3 VGA signal is dimmer than the input 3 DVI-D signal.  (Rich Smith, California)This is the case in 4 ...

This document was generated from CDN thread Created by: henry kyburg on 03-05-2011 09:26:29 PM We have been trying in vain to get a C40 to work with digitized video signals. We tried a Kramer YC to HDMI and an Extron VGA to HDMI.Both work for a perio...

This document was generated from CDN thread Created by: Joseph Carideo on 29-04-2011 10:29:49 PM Hi,We have just installed the TVS in one of our rooms and the control features work fine, both via the remote control and via the Crestron touchpanels. W...

This document was generated from CDN thread Created by: Donald Newman on 29-04-2011 03:32:02 PM I am interested in providing CODEC control of external cameras (via AMX) with the C60.  With the MXP CODECs you could use the EXTCAM settings for passing ...

This document was generated from CDN thread Created by: Oksana Dubok on 28-04-2011 10:50:45 AM Hello. Can we use the Movi client on IPad?Subject: RE: Movi client for IPad Replied by: Alex Shaw on 19-05-2011 01:23:01 PMHi!Old post, but I guess other p...

This document was generated from CDN thread Created by: Tom Aldridge on 28-04-2011 12:19:58 AM Hello all,We have a couple of meeting rooms with ceiling mounted microphones (either Tandberg Audio Science or Crown CM-31) where the microphone cables com...

This document was generated from CDN thread Created by: Jim Sharp on 27-04-2011 10:12:48 PM I beleve that on the C-series there is a way to poll the unit to see the entire "file structure" for the xfeedback options (ie status/call/displayname).  That...