Collaboration Knowledge Base

This document was generated from CDN thread Created by: Jim Sharp on 27-04-2011 10:12:48 PM I beleve that on the C-series there is a way to poll the unit to see the entire "file structure" for the xfeedback options (ie status/call/displayname).  That...

This document was generated from CDN thread Created by: Ed Rebert on 26-04-2011 03:21:11 PM Does the C20 codec support 232 control via an AMX touchscreen via a NETLINX 2100?  We are looking into the installation of several codecs with touch screen ca...

This document was generated from CDN thread Created by: Benjamin Alva on 25-04-2011 09:05:24 PM I have found that the module does not work with the current Crestron Firmware rev and had to actually back it down to rev 3.155.1240 to be able to use the...

This document was generated from CDN thread Created by: Chris Backus on 25-04-2011 03:28:50 PM Is there a published API for control of the Profile Displays?  I have been asked to monitor the device, and change inputs on the device.  In its default co...

This document was generated from CDN thread Created by: jerome corbin on 22-04-2011 03:16:35 PM Hello,where can I download the French language pack for TCS V5 ?thanksSubject: RE: Language pack file for TCS V5 Replied by: James Petersen on 26-04-2011 ...

This document was generated from CDN thread Created by: Bret Wittmann on 22-04-2011 02:30:50 AM I think there may be a bug when compositing hdmi camera input 1 full screen to output 3 composite. It seems to work intermittently at best. I am using the...

This document was generated from CDN thread Created by: Flo H on 21-04-2011 05:08:54 PM Hi everyone,I have some problems with the firmware version of my PrecisionHD USB cameras.I have some devices with V1.1, some V1.2.1, and some with V1.3.0.The ones...

This document was generated from CDN thread Created by: jerome corbin on 21-04-2011 03:32:21 PM hello,We use TMS (SN 80A40149) with 40 EP since 2008 and here are our comments.For the moment we use TMS v13.0thanks,Jerome

This document was generated from CDN thread Created by: jerome corbin on 21-04-2011 03:04:51 PM We use TCS V5 for 1 month and here are our suggestions:Missing features in TCS V5.0 :• Upload thumbnails to customize then thumbnails• Upload video in the...

This document was generated from CDN thread Created by: Matias Schwartz on 18-04-2011 06:16:55 AM Hi, my question is if it is possible call three sites using speed dial or one phone book entry.I read on the Administration Guide "Calling more than one...

This document was generated from CDN thread Created by: Dan Giesen on 14-04-2011 09:06:42 PM Is it possible to us the Compositor Tool to send 2 camera feeds to 2 displays at a remote location?  And, can the remote codec (C60 or C90) send 2 camera fee...

This document was generated from CDN thread Created by: Andy Fliss on 14-04-2011 06:26:23 PM Our input to the HDMI input 1 on the C40 codec comes from the RTCOM CR-94M matrix router. The image output from the codec maps to the Sharp display perfectly...

This document was generated from CDN thread Created by: Duane Benson on 14-04-2011 02:13:35 AM I have an application that I have been running for many months against the TMS Booking API, and it uses the H323ID property that is returned by the GetSyst...

This document was generated from CDN thread Created by: Jerzy Zielinski on 13-04-2011 04:51:53 PM All,I was sent to the forum by Tandberg Tech Support to ask you if somebody has a solution to my problem. What we are trying to do is to get a list, by ...

This document was generated from CDN thread Created by: Tammie Oldham on 13-04-2011 02:57:33 PM for my Tandberg 6000 Codec.  Old one was lost, can't use the equipment without it... any help would be greatly appreciated.Subject: RE: Help!  Desperate f...