Collaboration Knowledge Base

This document was generated from CDN thread Created by: Francesc Mas on 13-04-2011 10:40:02 AM Dear Sirs:Tandberg C20 works perfectly with:GEFEN component analog converter ( RGB ) - HDCP compliantModern TFT Monitors - HDC compliant.TV's - HDCP compli...

This document was generated from CDN thread Created by: Thomas Buchholz on 11-04-2011 05:17:41 PM We have sevearal C20 and C40 codecs running with 3.1.1 and 4.1 software with Precision HD 1080p 4x cameras.i am wondering about the software verison of ...

This document was generated from CDN thread Created by: Steve Collins on 10-04-2011 05:03:37 PM What are the thread specifications of the PRECISIONHD 1080P CAMERA, need to mount to tripod.Subject: RE: Tripod Thread Specs of PRECISIONHD 1080P CAMERA R...

This document was generated from CDN thread Created by: Marcus Newnam on 08-04-2011 07:18:46 PM In the TMS CDR report I see the fields Start Time,  Duration (sec) and Duration.  Is this information keep in the DB or is this obtainable via an API call...

This document was generated from CDN thread Created by: John Masters on 08-04-2011 05:11:59 PM I am working on a C60 codec running firmware 3.1.2.22 The client has 70 units all running this firmware.With a AMX NI-4100 connected via serial using the A...

This document was generated from CDN thread Created by: Samat Toibazarov on 08-04-2011 10:37:07 AM Hi, We have Tandberg E20. And we've connected to this device via SSH. So we can make calls by putty terminal. But we want to execute "xcommand dial num...

This document was generated from CDN thread Created by: Kevin Huysegoms on 06-04-2011 05:08:32 PM Hi,A Tandberg C60 system has 2 HDMI inputs coming from a Crestron DigitalMedia switcher. The output of the Tandberg goes directly to a display. Turning ...

This document was generated from CDN thread Created by: Arne Kampesæter on 06-04-2011 12:37:27 PM Hi,my C60, after upgrading to 4.1, don`t save video setting on Input3. It keeps falling back to DVi, even if I set it to Composite. I`ve tried to edit t...

This document was generated from CDN thread Created by: Syed Adnan on 04-04-2011 02:08:52 PM Hi,How input in display of tandberg 42'' profile?Regards,Adnan Gerdazi

This document was generated from CDN thread Created by: Wilson Chan on 04-04-2011 09:27:39 AM Dear All   I would like to know , could C60 support 3 1080HD Camera( Tandberg) without any central Control such as AMX. however , i still want to use presen...

This document was generated from CDN thread Created by: Dennis Packard on 01-04-2011 10:15:06 PM Is there a native TC Console download available? I need to burn a copy to give to operators who are not connected to an outside server. Java script will ...

This document was generated from CDN thread Created by: David Stimson on 01-04-2011 11:25:47 AM Hi,We have successfully linked our booking system into a loan TMS and can make, view and delete bookings using the TMS API.When we tried the pre-productio...

This document was generated from CDN thread Created by: Andy Wander on 31-03-2011 07:43:36 PM We have a c20 that we installed in a customer's conference room.The customer wants to make H.323 calls without using a gatekeeper. I have the following spec...

This document was generated from CDN thread Created by: Patrick Groothuizen on 31-03-2011 05:42:29 PM Is it possible to hide the presentation source on the local monitor when sending it to the far end side? Only the far end camera must be shown.I am ...

This document was generated from CDN thread Created by: Thomas Buchholz on 31-03-2011 11:42:23 AM we have an issue with one c-series codec.. after reboot the screen clock always resets to 00:00 am and the date to 01/01/1970.NTP settings are well conf...