Collaboration Knowledge Base

This document was generated from CDN thread Created by: mike brennan on 18-11-2009 08:25:12 PM when using this command what is the video type source for far end sites in a multipoint call and you want to display site 1 on monitor 1, site 2 on monitor...

This document was generated from CDN thread Created by: Tim Bailey on 17-11-2009 03:33:04 PM I am looking for a source for in depth technical spec for both of the Tandberg HD cameras (and the TVS Switch).  This level of information is readily availab...

This document was generated from CDN thread Created by: Syaza Md Taib on 13-11-2009 06:41:39 PM Hi,I'm a complete beginner to APIs and have started to use the Tandberg API, using a 3000 MXP Codec for a Video Conference unit. I want to set the mode to...

This document was generated from CDN thread Created by: Raymond Ng on 13-11-2009 06:24:48 PM Hi guys,We've been developing with the Codian API and came across a fairly strange error. The participant.enumerate method returns the currentState address f...

This document was generated from CDN thread Created by: Mark Corlett on 12-11-2009 06:41:24 PM We have some long rooms that thwart the cameras ability to focus.As a fix, we have tried to gain control over the near end camera focus.The 3.0 module will...

This document was generated from CDN thread Created by: David Bruun-Lie on 12-11-2009 04:12:18 PM The new software version TC 2.1 for Codec C20, C60 and C90 is now released.The AMX module that has been available for a while for downloading from this ...

This document was generated from CDN thread Created by: Marios Maltezis on 11-11-2009 01:51:22 PM Hi,Is there a document for controlling a C20  either through Telnet or Serial connection ?Please advise.MariosSubject: RE: Controlling a C20 Replied by:...

This document was generated from CDN thread Created by: Marko Laurits on 09-11-2009 03:28:09 PM Hello world,Would it be possible to connect Canon VC-C4 as the second camera to Edge and control it with Tandberg remote?I understood from the manual that...

This document was generated from CDN thread Created by: Luong Thien on 09-11-2009 10:34:42 AM I use precision HD 1080p camera to capture eye images but their resolutions are only 119 pixels. I want to increase them into 200 pixels. In my opinion, usi...

This document was generated from CDN thread Created by: Richard Hills on 08-11-2009 11:10:17 PM I have a client who wishes to use AMX to provide basic control of a C20 codec.  They do not wish to connect the AMX to the LAN and request that I use RS23...

This document was generated from CDN thread Created by: Aaron Boggs on 06-11-2009 03:39:20 AM We use the 2 of the Codian 4515 F3.0(1.5) MCUsI would like to be able to upload and image to the codian to be used any time we have an audio only participan...

This document was generated from CDN thread Created by: Aaron Boggs on 06-11-2009 02:29:36 AM We are using MXP Edge95 with and without ClearOne audio mixer for table mics and ceiling speakers.We use Codian bridges with Auto Attendant, with this we ar...

This document was generated from CDN thread Created by: Benjamin Alva on 05-11-2009 04:40:46 PM I've downloaded your module and sample code and it appears to already be setup for serial communication, I have my C60 on com4 so that is the only change ...

This document was generated from CDN thread Created by: Aswien Behari on 05-11-2009 02:54:41 PM Hi all,With the call GetConferences you can get the conferences with given search criteria, right? Now what I am missing is the possibility for providing ...

This document was generated from CDN thread Created by: Aswien Behari on 05-11-2009 02:42:45 PM Hi all,I've upgraded a E20 to version TE2.0.1.193887. The webinterface is not accessible after the upgrade. I'm trying to make a webrequest to the E20 fro...