Collaboration Knowledge Base

This document was generated from CDN thread Created by: Doros Antoniadis on 04-11-2009 02:10:55 PM Can the C20 mic work with 48V phantom power (I’ve read the specs about the 12V)?Regards,DorosSubject: RE: C20 mic can work with 48V? Replied by: Enrico...

This document was generated from CDN thread Created by: Pooven Naidoo on 04-11-2009 12:40:09 AM Does the codecs support HDCP?Subject: RE: C20,C60,C90 HDCP Replied by: Roger Boe on 04-11-2009 09:07:17 AMHi Pooven,Currently this is not supported. We ha...

This document was generated from CDN thread Created by: JEREMY WADHAMS on 04-11-2009 12:13:24 AM We're using database-driven presets to control the cameras in our new web-based video control tool.  The presets are stored on our central control server...

This document was generated from CDN thread Created by: Marko Laurits on 03-11-2009 05:46:21 PM Hello,I am creating a customised web interface for users. The customised web interface communicates with Tandbergs over telnet API.User can initiate sever...

This document was generated from CDN thread Created by: Stig Karlsen on 03-11-2009 05:12:49 PM Hi,A moderated question ....Case:As a connection point in a multisite I want to mute my audio out to individual remotesites. (Not all at once) I can do tha...

This document was generated from CDN thread Created by: Marios Maltezis on 03-11-2009 04:37:48 PM Hi,As i can see in the Video Compositor 1.1.0 in the API output I'm getting every command I'm sending plus the response from the C90 plu some feedback c...

This document was generated from CDN thread Created by: Pooven Naidoo on 30-10-2009 06:08:34 PM IS it possible to turn off the echo cancelling via api commands on the C20. PoovenSubject: RE: Echo Cancelling on the C20 Replied by: Roger Boe on 02-11-2...

This document was generated from CDN thread Created by: Benjamin Isak on 29-10-2009 09:19:49 AM Hi All,I´ve got a problem with an XML-RPC Method-Reponse, which I get from the ISDN GW! I read out all the active calls with the calls.active.enumerate - ...

This document was generated from CDN thread Created by: Frode M on 28-10-2009 04:25:28 PM Hello, I've got a question about the "Quality: Motion/Sharpness" setting (xConf Video Input Source [1-5] Quality). It appears this is actually a hint to the vid...

This document was generated from CDN thread Created by: Marko Laurits on 27-10-2009 02:10:50 PM Hello,If you connect a LCD-TV to Tandberg MXP by VGA cable then standby signal goes from Tandberg to the TV-set. When Tandberg goes asleep, the TV-set doe...

This document was generated from CDN thread Created by: Doros Antoniadis on 27-10-2009 01:27:26 PM We are trying to build a custom T2 room (for 4 persons) using only one C90 with 2 cameras. Also in front of every 2 persons there will be a touch-pad f...

This document was generated from CDN thread Created by: Niklas Andersson on 27-10-2009 12:23:01 PM Hi!1. Is it possible to use a path for changing videosource in a frame (for ex localinput). Its a lot of traffic to change 5frames in 4way call     =20...

This document was generated from CDN thread Created by: Richard Cardwell on 22-10-2009 04:16:02 PM Can you use a Sony EVI-HD1 as a second camera with PTZ control from the Tandberg handset by using HDSDI input 4 for the camera image and using the RJ11...

This document was generated from CDN thread Created by: Benjamin Isak on 22-10-2009 03:24:19 PM Hi there,how about a new category like "General Discussion" oder something like it! I thought about it, cause I got a question, which do not fit in the cu...

This document was generated from CDN thread Created by: Timo Hiekkanen on 22-10-2009 09:49:47 AM Hi,as the subject says: Can I use C60+C90 module for C20 codec?Thanks,- TimoSubject: RE: C60 module ok for C20 codec? Replied by: David Bruun-Lie on 22-1...