Collaboration Knowledge Base

This document was generated from CDN thread Created by: Gerald Chong on 23-01-2012 08:58:35 PM I have a 9971 running on CME 8.6, test on startMedia to receive multicast stream, it work on CUCM but fail with CME. Initially I through is AUTH URL issue,...

This document was generated from CDN thread Created by: Abdul Rasheed on 23-01-2012 05:51:50 AM Hello,              My name is Abdul Rasheed, i am working on a voice recording solution using SIP trunk and BIB.  It was noticed that while running the s...

This document was generated from CDN thread Created by: Moshe Abramovitch on 23-01-2012 05:50:17 AM  HI All I am tring to open a support session using XML API, I using the XML request CreateSupportSession to open a new support session " <?xml version...

Subject: RE: can we turn on debug on specific app serv or dial-peer Replied by: Anusha Kannappan on 23-01-2012 01:41:05 AMHi Srikanth,Sorry we can't turn on the debugging on a specific app service or dial-peer. Thanks,AnushaSubject: RE: can we turn o...

This document was generated from CDN thread Created by: Walid Azab on 22-01-2012 10:56:43 AM Hi, Is there any difference between normal CUCM CDRs and the CDRs which are generated by Cisco Unified Communications Manager Business Edition 5000 ?Also the...

This document was generated from CDN thread Created by: jonathan baldwin on 23-01-2012 08:45:50 AM Hi, Has anyone encountered these; 1.  I have setup the proxy information on Socialminer but there are no options for authentication and our proxy requi...

This document was generated from CDN thread Created by: Jay Van Cott on 20-01-2012 11:38:34 AM I'm using a 'voice element - digits' that occasionally fails to work correctly.  Most of the time (about 90%), the workflow enters the element, the audio f...

This document was generated from CDN thread Created by: Breno Lucena on 19-01-2012 02:01:26 PM Hello Everybody, Does anyone knows how to get EM Logged User using AXL API? Thank you in advance! Regards. Breno LucenaSubject: RE: How to get EM logged us...

Subject: RE: CUCM sends INVITE after 900 sec Replied by: Dan-Anders Hook on 19-01-2012 08:23:14 AMHi,Sounds like interop problems with session refresh. Try changing the CUCM Service parameter "SIP Session Expires Timer". A refresh is sent after half ...

This document was generated from CDN thread Created by: Jason Morgan on 18-01-2012 02:31:49 PM What emulators are available for testing IP Phone services developed for a 7975G Cisco IP Phone?  Do they require an existing Cisco Application Server envi...

This document was generated from CDN thread Created by: Lisa Dusseault on 18-01-2012 01:11:09 PM We're working on getting single sign-on working with our site scheduling meetings.  It currently works with a java-enabled browser: our site prompts the ...

This document was generated from CDN thread Created by: James Riddle on 17-01-2012 04:54:52 PM Hi Guys, Currently ran into a problem with our Unity PIN reset which we use via the services key resulting in "Voicemail not enabled for user" where in act...

Subject: RE: Compatibility of JTAPI 8.5 application with CUCM 8.6 Replied by: Abhishek Malhotra on 17-01-2012 10:47:04 AMJTAPI is backwork compatible to +2 releases in line with CUCM upgrade path unless indicated otherwise. So your existing 8.5 appli...

This document was generated from CDN thread Created by: Divya Pillaivakam Sampath on 17-01-2012 12:40:16 AM Hi, We are using AXL API for communicating with Call manager for various operations like getUser, addUser etc.. When I tried accessing getUser...

This document was generated from CDN thread Created by: Sebastian Grana on 17-01-2012 03:16:38 PM Hi all, I'd installed the sdk into a win server and created the customdirectory to pull the users from my AD.Everythnig works fine with 79XX phones, but...