09-02-2020 04:36 PM
I have configured ece delayed call back entry point, mapped to default cisco voice delayed call back queue, and scriptselector mapped and it is mapped to call type and icm script and skill group to node (routing) like normal dialer script.
Agent logged in Finesse and call the delayed call back entry point filled the form. however the form returns the error system cannot assign an agent to the request.
I can't import other cisco voice MRD/ DN /script selector for queues. Does it support only default voice queue in the ece ?
Is there any configuration missing ? how and where i can find the logs or any specific ece service like chat and email.
UCCE 11.5 and ECE 11.6
Appreciated any help .
09-02-2020 07:36 PM
There's a few things to consider when it comes to ECE Callbacks
09-02-2020 07:58 PM
Forgot to mention... in regards to the dial plan, you could also do something within the template. By default, country codes are enabled (Us and UK) and will prepend 001 (if US). I'd recommend going into the template and editing the eGainLiveConfig.js file and changing the value of useCountryCode from 1 to 0.
You can also query the Route_Call_Detail table and see what the value is for the ANI to see if it looks right to you.
09-03-2020 01:26 PM
Hi Omar, first of thank you very much for detailed explanation.
I did all the configuration like in the post, able to see the records in TCD/RCD etc however it still returns the error "system cannot assign an agent to the request"
RCD shows router error code 64 and TCD call disposition 7 (short call). Rechecked the DN to calltype to script mapping, all well in place.
As said, call triggers to call manager, assuming for DN, pim should be call manager pim ? or call is through the dialer pim ?
Like said i edited the prefix dialing in egainLiveConfig and route pattern is available in the call manage and able to make call through IP phone.
for my curiosity, will it dial the customer or check the agent availability first ?
Appreciated if you can light some more troubleshooting steps or snap of icm scripting will be good.
10-05-2020 12:21 PM
Having the same issue. Any luck figuring out what the cause was? Thanks!
10-09-2020 02:12 PM
Hi all,
One thing that you should definitely check is that you've included the ECE Routing Client in the Agent Targeting Rule. In Finesse, does the agent actually get the Pre-Call indicator? When the MRD configuration has been missed, you'll see the agent (on the voice tab) switch quickly between Reserved and Ready/Not Ready.
Below is a diagram of how Callback works with ECE. Notice, as stated above, that it is CUCM that places the call after being instructed by the PG. The PIM is the Agent PG PIM. The dialer and VRU are not a part of this flow. The answer to your question about order, the agent will be located, then the call is placed. The call is made by CUCM using the agent's phone, so really, it looks like an outbound call to CUCM from a phone. Let me know if you still are not able to get this working.
05-05-2022 06:40 AM
DO you have configuration doc to setup webcallback,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide