12-17-2014 06:01 AM
Hi,
Could anyone clarify why am I getting the port number on preview call instead of customer ANI. This happens only in Finesse 10 and above. But it is working fine in Finesse 9.1. Below is the snapshot of Finesse 10 version.
Because of this issue I could not do screenpop on Preview call based on CLI/ANI.
Thanks,
Dany
12-17-2014 01:18 PM
What does your Call Variables Layout in the Finesse Administration look like?
g.
Gary Olmsted
Technical Leader & Finesse Architect
CBABU - Contact Center Software Development
12-18-2014 05:52 AM
There is nothing configured in call variable layout, and there is no data from call variable layout. Below is my finesse admin screenshot and the preview call scenario which will help you.
Screen 1: cfadmin page
Screen 2: Preview call - which displays port number during preview to agent (reserved) desktop.
Screen 3: Preview call - answered. Now it displays ANI.
Hence, I need ANI to be displayed during Preview an outbound call.
Thanks,
Dany
02-11-2015 07:47 PM
That's the reservation call from the Dialer, thus you see the Dialer port as the ANI. Until you accept the call and the outbound call is placed there is no customer ANI yet.
02-12-2015 01:31 AM
yes. you are right. As per preview call explanation, an agent can view the customer information even before he accept the call.
In Finesse 9, It is working.
Thanks,
Dany
10-17-2016 12:18 PM
Any Solution for this issue .
We are using Finesse 11 and need to display Phone number so that agent can decide to accept or reject based on the phone number.
10-17-2016 01:04 PM
Hey Chandra,
I had a similar requirement for my Qs. See if these work for you.
Try these. I had a similar requirement for my Qs.
10-17-2016 01:17 PM
Sorry Chandra,
Didn't ready your question correctly. These wont work for your requirement.
10-17-2016 01:14 PM
Hi,
As stated by dchumbley, Finesse doesn't know about the customer ANI until the outbound call is accepted. As a result, there has not been any change to Finesse. I am not an expert in scripting or outbound, but if there is a way in the scripts to put the customer's phone number in a call variable or ecc variable, you can take that route (customize the call variable layout).
Thanx,
Denise
10-17-2016 01:16 PM
Ah. Looks like Juan read my mind and posted the solution to my suggestion. Thanks Juan!
10-17-2016 01:21 PM
Thanks Denise,
I think Chandra needs something outbound though...not sure if how i have it configured will work for the requirement. Could always just play around with it to see if works.
10-18-2016 04:23 PM
Is there any way we can send ANI Through ICM Script for Direct Preview Calls to Finesse during Reserve Mode
I have tried to configure call.callinglineid and Dialednumberstring Variables but no data is coming in those variables.
Please assist
10-21-2016 09:44 AM
Hi mcreddy008,
Sorry for the delayed response. I reached out to the Finesse architect for this question as I do not have enough expertise in this area. The architect's response was:
Yes. In UCCE, Agent Reservation leg is same for all type of outbound ( Preview / Direct Preview / Predictive) and you can use 'set_ variable' nodes in Routing script to assign values to call variables and/or ecc variables and its supported.
Also, do note that any custom ecc variables needs to be in the format of user.* to be displayed on the call control layout. The best thing to do to see if it is a layout issue versus a script issue is to take a look at the dialog event being sent to the desktop in the client logs. If you see the key/value call/ecc variable pair, then it is a layout issue. If you do not see the right values, then it is a script issue.
I hope that answered your question.
Thanx,
Denise
10-21-2016 09:48 AM
Hi,
I also wanted to note that I was incorrect in saying that Finesse doesn't know about the customer ANI until the outbound call is accepted. Apparently it is a CCE bug.
The Finesse architect told me that if you are seeing the dialer port number on the call control gadget rather than the customer ANI, then you should raise an issue with the CCE TAC so that they can provide a workaround.
Thanx,
Denise
10-28-2016 09:13 AM
This issue has been resolved after we upgraded to Finesse 11.5(1).
Thanks for your support
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide