3rd party SIP phones supported in Cisco CUCM v9.0 onwards

[gawankar_sanket]

Dear Experts,

Is there list/ documents enlists all supported 3rd party SIP based phones (software as well as hardware) which are supported in Cisco CUCM v9 and above?

Thanks

Sanket G.

[Rajan]

Hi Sanket,

You can register any 3rd party sip phone as long as it is RFC 3261 complaint:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_0_1/sysConfig/CUCM_BK_C733E983_00_cucm-system-configuration-guide/Configure___Third_Party_SIP_Phones.pdf

HTH
Rajan
Pls rate all helpful posts by clicking the star below

[gawankar_sanket]

Thanks Rajan, but is there any list of 3rd party SIP phones which are supported with CUCM ?

I have already tested polycom softphone, Grandstream phone. Looking for any other phones model which will work well with CUCM.

Sanket G

[Aeby Vinod]

Not really sure if such a list exists for the newer versions of CUCM , apparently there used to be a program called (CTDP) to enable 3rd party vendors to test and verify the interoperability of their end points with CallManager and CallManager Express during the callmanager 5.0 days, looks like it was scrapped later on for phones.

https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwiDr_ebharZAhWHX5QKHTLABvAQFggmMAA&url=https%3A%2F%2Fwww.cisco.com%2Fcomm%2Fapplications%2FIPCApps%2FDocs%2FSIPTHIRDPARTYENDPOINTFAQ3_20_06.doc&usg=AOvVaw1V4ci...

It would be better if you can select a non cisco model and check with them to see how well the device works with CUCM from a feature perspective.

Please rate if you find this helpful.

Regards,
Aeby

[erick@intalenti.mx]

Hi, how did you handle licensing? How many licenses did you consume for this integration?

[Jaime Valencia]

tekVizion is the only one I know who does that

[gawankar_sanket]

Thanks Jaime.

So for  I could find below phones tested with CUCM.

1. 3sx-softphones

2. IPCelerate,

3. IP blue,

4. Grandstream

5. Revolabs

6. Tekvizion

7. Polycom softphone

[Dennis Mink]

you will find lack of customizability in terms of softbuttons and services is gonna be your biggest problem running any of these on cucm

[spoonek]

Polycom Trio 8800 works with CUCM 11.5.

I used this to get mine up and running in no time.

https://support.polycom.com/global/documents/support/setup_maintenance/products/voice/dg_soundstation_ip_conference_phones_with_cucm.pdf

[jiji220]

phones which are supported with CUCM ?

I have already tested polycom softphone, Grandstream phone. Looking for any other phones model which https://xender.pro/ https://discord.software/ https://omegle.onl/

[Glenn Jordan]

Can any of these use extension mobility? 

[Roger Kallberg]

I don’t think so as that is a Cisco proprietary function.