cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
560
Views
0
Helpful
4
Replies
Beginner

9971 BLF SPEED DIAL

Dears,

By refering to the subject,It is not clear if blf speed dials is supported or not - as per cisco document it is supported; but we configure it for our expansion module for the 9971 it is not working (it does not show the status for the speed dials) Any specific configuration or it is not supported (We have call manager 8.6.2 and IP Phone firmware 9.3.X).

Regards,Karim

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Master

9971 BLF SPEED DIAL

Yes, it is supported. You need to ensure you have proper "Subscriber Calling Search Space" defined on the phone with the BLF defied which includes partition of the target DN.

HTH,

Chris

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Master

9971 BLF SPEED DIAL

Yes, it is supported. You need to ensure you have proper "Subscriber Calling Search Space" defined on the phone with the BLF defied which includes partition of the target DN.

HTH,

Chris

View solution in original post

Advisor

9971 BLF SPEED DIAL

Beginner

9971 BLF SPEED DIAL

thanks for you reply Chris ,Aman I will double check this and update you tomorrows.

Beginner

9971 BLF SPEED DIAL

Yeah it was the subscribe CSS,thx

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards