Debug ccsip messages

[seventeen]

Hello community ,

I'm debugging a gateway to verify if the international call pass or no , can you help with an output or anything else so I can verify ?

[b.winter]

Hi, what do you mean with your question?
If you have problems with a call, make a test call and post the output of the debugs here, so other people can help you analyze it.

[Nithin Eluvathingal]

I hope your question is how to debug 

if it’s a isdn pri line use debug isdn q931 

debug voice ccapi inout also give more information 

if it’s a sip trunk use debug ccapi messages 

[Maren Mahoney]

You can also post your debug here along with the calling party information and the international number they are trying to dial. We can help take a look.

Maren

[seventeen]

 dial-peer voice 56 voip
--More--   description * Appel InterNational PSTN via Trunk SIP *
translation-profile outgoing outgoing-PSTN
preference 1
destination-pattern ^9T$
session protocol sipv2
session target ipv4:xx.xx.xx.xx
voice-class codec 1
dtmf-relay rtp-nte
no vad

[seventeen]

Hello , The problem was resolved after debugging the gateway , we haven't observed anything special so we conclude that the problem is due to the operator who is blocking the international call.

Thanks guys !