07-20-2017 09:36 PM - edited 03-17-2019 10:50 AM
Hi all,
I need to change the phone language of 8845, from English to Simplified Chinese.
However, the ip phone 8845 fail to change to language to Chinese after I configure the "User Locale" in CCM Phone Profile.
Anyone had the same problem and any suggest ? Thanks a lot!
Some Details as below:
Locale version:10.5.2.2200-1
CCM version:10.5.2.13901-2
8845 version:11.5.1SR1-1
Solved! Go to Solution.
07-20-2017 11:02 PM
Hi,
If you check the Read Me file for this locale, it does not include 8845 as one of the supported phone models
http://www.cisco.com/web/software/282074333/131507/cm-locale-10.5.2.2200_ReadMe.pdf
Manish
- Do rate helpful posts -
07-20-2017 11:02 PM
Hi,
If you check the Read Me file for this locale, it does not include 8845 as one of the supported phone models
http://www.cisco.com/web/software/282074333/131507/cm-locale-10.5.2.2200_ReadMe.pdf
Manish
- Do rate helpful posts -
07-21-2017 01:47 AM
Thanks for your help. It's my careless mistake.
The document is useful.
07-21-2017 02:55 AM
Not a problem, its always recommended to check the Read Me files before installing any new firmware, locale, device pack or any special cop files.
Manish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide