05-17-2013 08:10 AM - edited 03-16-2019 05:23 PM
I have configured 30 6941 phones on a CME9.1, using CLI. All phones work fine, but only 20 of them are shown in in the CME GUI (Configure -> Phones). All phones have been configured identically, and it seems that just the phones with an ephone tag ("phone sequence number") higher than 60 are not shown.
Could it be related to the fact that "max-ephones" for my platform is at 58?
Your help is greatly appreciated.
Cheers
/David
Solved! Go to Solution.
05-17-2013 08:39 AM
Hi David,
I think you are right on the money my friend
This was considered a bug in CME 7.1 but as it was terminated
and not shown as "fixed" maybe this is the common behavior;
Description
Details
Status:
Terminated
Last Modified:
May 08,2013
Product:
Cisco IOS Software
Platform:
Dependent
Severity:
3 - moderate
Cheers!
Rob
"go easy...step lightly...stay free "
- The Clash
05-17-2013 08:39 AM
Hi David,
I think you are right on the money my friend
This was considered a bug in CME 7.1 but as it was terminated
and not shown as "fixed" maybe this is the common behavior;
Description
Details
Status:
Terminated
Last Modified:
May 08,2013
Product:
Cisco IOS Software
Platform:
Dependent
Severity:
3 - moderate
Cheers!
Rob
"go easy...step lightly...stay free "
- The Clash
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide