cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2001
Views
0
Helpful
7
Replies

Single Number Reach (SNR)

Hi all,

I have CUCM 7.1.5

Can Create SNR "Remote Destination Profile" one time for all Uesrs?

I have around 4000 users is it needs license?

Thanks

Abdul

3 Accepted Solutions

Accepted Solutions

moataz_mamdouh
Level 1
Level 1

Yes , you can use BAT

Sent from Cisco Technical Support iPhone App

View solution in original post

Chris Deren
Hall of Fame
Hall of Fame

BAT is the way and with your version you will need 1 DLU per mobility enabled user.

Chris

Sent from Cisco Technical Support iPhone App

View solution in original post

After I used BAT, is I need to change the "Destination Number" for each user one by one? - Or you can change it from Remote destination csv file - "DESTINATION" box in the RD csv.

Rate all useful post.

Thanks

Manish

View solution in original post

7 Replies 7

moataz_mamdouh
Level 1
Level 1

Yes , you can use BAT

Sent from Cisco Technical Support iPhone App

Thnak you Moataz,

After I used BAT, is I need to change the "Destination Number" for each user one by one?

because each user has different Ex. on other PBX (actually the same his Ex but begin with ## ).

Thanks

After I used BAT, is I need to change the "Destination Number" for each user one by one? - Or you can change it from Remote destination csv file - "DESTINATION" box in the RD csv.

Rate all useful post.

Thanks

Manish

Chris Deren
Hall of Fame
Hall of Fame