Single Number Reach (SNR)

[Abdo Ahmed Saleh Al-Kaf]

Hi all,

I have CUCM 7.1.5

Can Create SNR "Remote Destination Profile" one time for all Uesrs?

I have around 4000 users is it needs license?

Thanks

Abdul

[moataz_mamdouh · Accepted solution]

Yes , you can use BAT

Sent from Cisco Technical Support iPhone App

[Abdo Ahmed Saleh Al-Kaf]

Thnak you Moataz,

After I used BAT, is I need to change the "Destination Number" for each user one by one?

because each user has different Ex. on other PBX (actually the same his Ex but begin with ## ).

Thanks

[Manish Prasad · Accepted solution]

After I used BAT, is I need to change the "Destination Number" for each user one by one? - Or you can change it from Remote destination csv file - "DESTINATION" box in the RD csv.

Rate all useful post.

Thanks

Manish

[Chris Deren · Accepted solution]

BAT is the way and with your version you will need 1 DLU per mobility enabled user.

Chris

Sent from Cisco Technical Support iPhone App

[Abdo Ahmed Saleh Al-Kaf]

Thanks Cris,

I am going to upgrade  to V10 after couple of month. is should I keep in mind these Licences For SNR?

Thanks

[Abdo Ahmed Saleh Al-Kaf]

Hi

I contact Cisco they said that no need licenses for SNR in the UCL

Thnaks

[Chris Deren]

Correct, with version 9 and newer you will not need additional licensing.

Chris

Sent from Cisco Technical Support iPhone App