cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

608
Views
10
Helpful
4
Replies
Highlighted
Beginner

voice register dn shared line doesnt work with Cisco 8811 sip phones

Hi

We want to share the same extension number says 2434 to two sip phones 8811. But it looks like the two phones can not ring at the same time. The calls go to one phone and sometimes to other. Can someone confirm that cisco 8811 support this feature or not 

Below is my configuration. 

!
voice register dn 10
number 2434
call-forward b2bua busy 5400
call-forward b2bua mailbox 5400
call-forward b2bua noan 5400 timeout 20
allow watch
name Don
shared-line
no-reg
label Don
mwi
!

voice register pool 10
id mac 8890.8D73.20DC
type 8811
number 1 dn 10
presence call-list
dtmf-relay rtp-nte sip-notify
username 2434 password 2434
codec g711ulaw
no vad

!

voice register pool 15
id mac 8890.8D73.20DB
type 8811
number 1 dn 10
presence call-list
dtmf-relay rtp-nte sip-notify
username 24341 password 24341
codec g711ulaw
no vad

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3
2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Advisor

Hi,

Hi,

Shared-line is CME feature and not phone feature. Yes it is supported by Cisco. Can you try to increase the number of shared lines (default is 5). Please try these commands (after the phone reset test again)

voice register dn 10

shared-line max 5

voice register global

create profile

voice register poo 10

reset

voice register poo 15

reset

Cisco Employee

Can you please try the below

Can you please try the below command under the voice register pool and then do no create profile and create profile under voice register global

session transport tcp

Br,

Nadeem Ahmed

PS: Please rate all useful post.

Br, Nadeem Please rate all useful post.
4 REPLIES 4
VIP Advisor

Hi,

Hi,

Shared-line is CME feature and not phone feature. Yes it is supported by Cisco. Can you try to increase the number of shared lines (default is 5). Please try these commands (after the phone reset test again)

voice register dn 10

shared-line max 5

voice register global

create profile

voice register poo 10

reset

voice register poo 15

reset

Cisco Employee

Can you please try the below

Can you please try the below command under the voice register pool and then do no create profile and create profile under voice register global

session transport tcp

Br,

Nadeem Ahmed

PS: Please rate all useful post.

Br, Nadeem Please rate all useful post.
Beginner

changed the transport session

changed the transport session to tcp and it works.

thank you

dangquangminh@vnpro.org CCIE#11897 6016 Tillsdows Dr, Mississauga,ON Canada L5N4M3
Cisco Employee

glad issue resolved

glad issue resolved

Br,

nadeem

Br, Nadeem Please rate all useful post.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards