01-20-2016 08:36 AM - edited 03-17-2019 05:34 AM
Hi
We want to share the same extension number says 2434 to two sip phones 8811. But it looks like the two phones can not ring at the same time. The calls go to one phone and sometimes to other. Can someone confirm that cisco 8811 support this feature or not
Below is my configuration.
!
voice register dn 10
number 2434
call-forward b2bua busy 5400
call-forward b2bua mailbox 5400
call-forward b2bua noan 5400 timeout 20
allow watch
name Don
shared-line
no-reg
label Don
mwi
!
voice register pool 10
id mac 8890.8D73.20DC
type 8811
number 1 dn 10
presence call-list
dtmf-relay rtp-nte sip-notify
username 2434 password 2434
codec g711ulaw
no vad
!
voice register pool 15
id mac 8890.8D73.20DB
type 8811
number 1 dn 10
presence call-list
dtmf-relay rtp-nte sip-notify
username 24341 password 24341
codec g711ulaw
no vad
Solved! Go to Solution.
01-20-2016 08:48 AM
Hi,
Shared-line is CME feature and not phone feature. Yes it is supported by Cisco. Can you try to increase the number of shared lines (default is 5). Please try these commands (after the phone reset test again)
voice register dn 10
shared-line max 5
voice register global
create profile
voice register poo 10
reset
voice register poo 15
reset
01-20-2016 10:34 AM
Can you please try the below command under the voice register pool and then do no create profile and create profile under voice register global
session transport tcp
Br,
Nadeem Ahmed
PS: Please rate all useful post.
01-20-2016 08:48 AM
Hi,
Shared-line is CME feature and not phone feature. Yes it is supported by Cisco. Can you try to increase the number of shared lines (default is 5). Please try these commands (after the phone reset test again)
voice register dn 10
shared-line max 5
voice register global
create profile
voice register poo 10
reset
voice register poo 15
reset
01-20-2016 10:34 AM
Can you please try the below command under the voice register pool and then do no create profile and create profile under voice register global
session transport tcp
Br,
Nadeem Ahmed
PS: Please rate all useful post.
01-20-2016 10:46 AM
changed the transport session to tcp and it works.
thank you
01-20-2016 10:56 AM
glad issue resolved
Br,
nadeem
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide