Network Access Control

I am seeing this error under ACS failed attempts:External DB user invalid or bad passwordI have verified that password is correct. What is the cause of this?

Hi Folks,I have an ACS 5.4 which is integrated with AD and a RSA. Is there any possibility to Stop the ACS Application automatically if either of these devices are down.Thanks,Manoj

Delete.

What are the VMware requirements to run ACS4.1.4?  Im trying to use a VM this as the migration server.  According to the cisco docs, it states that:"ACS 4.1 has been tested on the VMWare ESX server with the following configuration: •VMWare ESX Server...

I'm trying to figure out the best way that I can authenticate users on different VLANs with different authentication mechanisms.I currently have my users being able to login with EAP-TLS utilizing SecureACS 5.2, I'd like to open up an additional VLAN...

I've looked at the forum posts and the document post, and I understand the explanations.My question is, under system administration>max user session global settings,would setting a timeout (say 1 hour) purge these sessions?Under access policies, I am...

Hi Bro'sI need advice. If I have 2 ACS (redundancy purposes), do I need to generate self signed certs from each of the ACS or just one of the ACS will do, just fine?The reason I asked is because the self signed cert is used for WLAN users authenticat...

I'm currently running ACS 5.3 Patch 7 in a VM on VMware ESXi. I download the application upgrade bundle, and placed it in my SFTP repository, and ran "application upgrade filename repository name". It throws an error that the manifest file is not fou...

Hope you guys can help explain why is it working this strange. Thank you.access-list NET1 permit ip host 10.1.2.27 10.76.5.0 255.255.255.224static (inside,outside) 192.168.100.100 access-list NET1ciscoasa(config)# show access-list access-list NET1 li...

Hi guys,Need a serious help.In one of the customer solution I am trying to integrate SecurEnvoy Radius server with ASA firewall, but not able to.SecurEnvoy server is listening on Port 1812 and working fine for other Radius clients except this ASA fir...

We are using ACS 5.1 and from time to time we are getting a warning saying that the active sessions are over the limit (250000).  It is just a warning, so my assumption is that its not a big deal, but how do we keep from getting the event, or prevent...