Network Access Control

Hello folks,I'm trying to use Network Access Manager module that comes with Anyconnect as dot1x supplicant. I had it downloaded to Windows PC and it shows that I'm connected to wired network. How would I configure it to use a particular set of dot1x ...

Hello everyone!I have a little bit of a complex dilemma in an ISE deployment and I am trying to lean more on how it works technically. Long story short: I am trying to do both machine and user authentication / authorization (per requirements from our...

I need to autheticate my clients connecting via wireless.clients have user certificate installed on them, i need help configuring the ACS to do the authentication. can some one please help me with the steps.Thanks

Dear,We have users using a GPRS connection authenticating against ACS : Fields received in radius package : Username & Calling-line_idWe have an ldap directory containing the same 2 fields : userPrincipalName & TelephoneNumber1)Is it possible to matc...

I have some VSAs to import into my 1113 box, but I am stuck before I can even start I have an accountActions.csv file containing some VSAs (this is just a test csv file.) I also have an FTP server that is accessible from the 1113 system. When at the...

Hi,I plan to take the CCNA Security exam, i have a home lab. and quite confuse with aaa new-model commands. Here's the commands that i issue on the router:# aaa new-model# radius-server host 192.168.1.3 key @testkey# ip radius-source interface fa0/1#...

Hi,We are planing to push the ACS reports from local to remote logging server.For that we are already having a RSA enVision server as remote logging server.Now i want to send my ACS report from ACS to RSA enVision, what is the procedure to send my lo...

ACS Guru'sWe have a requirement to install Juniper CTP's at a customer site with it authenticating to our Cisco ACS via Radius.  I'm a little unsure on how the accountsActions file is to be created based on what I have from Juniper in regards to the ...

HI all!I am trying to configure AAA authentication and authorization with Cisco 3725 (IOS 12.4(17)) for 802.1x and ACS 4.2 with VLAN assignment to my Windows XP client. (trying to assign VLAN 100 in my scenario).When user connects to the Router, it p...

Hello.We are using ACS 5.3 with two servers in a distributed solution.All logs are collected on primary server so when this server fails all logs are lost.How can I enable log on secondary server also?Thanks.Andrea

                   Hi,I'd like to know where the DB for the AAA caching is stored. because i made a caching for my users and it works well. but at reboot, the cache is empty and we need to reauthenticate to populate the DB.Is it possible to store tha...

Hi AllI am deploying a Cisco ISE together with a WLC to provide guest services. After the authentication the users will be redirected to the device registration page, this is done via the radius attribute "cisco-av-pair = url-redirect=https://FQDN:84...