Network Access Control

So this may be a bit of a dumb question...I stumbled upon an ASA today that is configured to authenticate against a Radius server for SSH and HTTPS connections. If I log in via SSH, I can't gain a privilege level of more than 1 (tried login command, ...

Hi,I have an ACS environment with PEAP working.  the root CA is about to expire i was going to just right click the root CA and try to renew with same keys.  Will this break the current users that have the certificate aready installed?  do i need to ...

Hi all,I need to configure ssh on my 3560 switch integrating with Microsoft IAS and when user try to access switch they need to use their domain credential for that, But i am getting following error message,"011192: Feb 16 20:30:01: %SSH-5-SSH_SESSIO...

In ACS 5.4 release note, it says:Multiple network interface connector support ACS  5.4 supports up to four network interfaces: Ethernet 0, Ethernet 1,  Ethernet 2, and Ethernet 3. ACS management functions use only the  Ethernet 0 interface, but AAA p...

Dear Experts ,The ADSL Modem CISCO867-K9 is not connecting to our NAS router with default mtu value in the NAS router virtual template Is there is any reason for ths ?  With the below settings my ADSL 867 connecting , but if i remove the (mtu 1440 an...

                   Hi all,I have set up a guest portal and been using it very wellbut I want guest users to get accepted by admin when they created their own IDso is there any way to send messages to admin when guest users create their ID ??and then ...

Hi All, We have a wireless product that we are developing. It needs to support many different wireless security schemes. The schemes that we are looking at initially are PEAP, PSK, LEAP and TTLS.We already have PEAP configured on one NPS microsoft in...

Hi All,I am having trouble configuring authentication for CLI (SSH) access to an ASA5585X when using TACACs that on-forwards the credentials to AD for authentication. ASDM access works fine but the CLI authentication provides level 1 access OK and th...

Hi,ISE is checking the update on internet and also Nac agent is detecting that AV definition not updated, but cisco Nac agent is not triggering Kaspersky to do AV Definition Update from Internal server.Pl. Suggest.                  

After research I know this is possibly a Nokia issue, and there are many discussions on this PEAP issue on Nokia, but I wanted to Check from ISE side if anything can be done:Apple devices, Android & Blackbeerry all connect and authenticate ok, throug...