Network Access Control

I got this error message(see attached image) when trying to bind a certificate from a CA.I generated a CSR on ACS 5.1 and sent it to the CA to get signed. I got a certificate from the CA which I tried to bind. I went to System Administration -> Confi...

Hello Is there a list of supported special characters that can be passed on to the Windows database? Is it the whole ASCII table or just a subset of it?Thanks a lot!Guido

Hi All,I need to renew my SSL certificate for ACS 3.3 and for that purpose i have generated the CSR from the ACS itself. While generating the CSR, i was not able to get the private key file (.pem) from my FTP server folder. I thought i may be saved i...

Hi allI need a configuration assistance for Cisco Secure ACS 1120 with ACS version 5.1 loaded.We are using AAA Protocol over TACACS+ for device administration , we are using RSA Token ID Server as a Extrenal Database for the authentication.We are not...

Is there an easy way to display User groups similar to NDG's?

Hi,Can anybody help me to find the procedure to chnage the TACACS eanble password in Telnet or SSH session.Thanks in advance.Regards,Sunil

After I upgraded the ACS to 4.2.0.124 it began showing the error below from time to time on the agent. It stops authenticating some users and after 50 minutes it the stops authentincating all of them. I tried to Restart all services on ACS but it did...

Gents, we have two ACS 4.2 for Windows. We moved to them from ACS SE 4.1. I restored all backups to ACS 4.2 and tried to setup replication, but it is not happening. I already checked through troubleshooting guide and seems like everything is configur...

An ACS Internal DB user cannot ssh to a 3750 switch but telnet works fine.Authentication method is TACACS+Other users in the same ACS user group as the problem user can both ssh and telnet to this switch OK.Debug on the switch shows:TPLUS: Received a...

We're using Cisco Secure ACS 5.1.0.44 for LDAP(Active Directory) authentication on our cisco devices.  The login prompt is spotty at times.  I have noticed that two like devices, say two 1231 AP's with the exact same configurations and IOS, minus dev...

We are trying to migrating from ACS 4.2 to 5.1. Abandoned trying to use the migrate utility when we ran into errors trying to use it and TAC said it was an unsupported utility.  Amazing that no where in the manual did I see "Unsupported" mentioned.On...