Network Access Control

Hi all,I have a DHCP server and I am going to install a new ACS server to handle authentication so when a user connects to the network it will be authenticated by the ACS server and after that the DCHP server will assign an IP address to the user. Is...

I am investigating the use of SCP/SSH for accessing of key routers/switches in our environment. I have followed the Cisco document at: http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087b18.html#wp10536...

Hi,I have 1 AP 1240 & ACS 4.1 Solution Engine. I want to authenticate internal users by their MAC addresses (that is created into ACS database) after selecting appropriate SSID from the AP. Let me give you an idea of the setup & config:I have a DHCP ...

My debug gives the following error. There are no problems getting from the router to the acs server. Please helpOct 5 09:59:56: TPLUS(00000AB6): Start write failedOct 5 10:00:01: TPLUS(00000AB6)/0/WRITE/6273894C: timed outOct 5 10:00:01: TPLUS(000...

Hii am install ACS 2.3 in sun solaries 8.0every device authentication authorization and accounting from ACS.now my concern is where stored log of acccounting and it is deleted automatic after a mergin day or need manully deleted ?i get like this The ...

Does any Cisco switch that has AAA support LEAP (like my old 2950)? If not, what's the the least expensive switch that will support wired LEAP?Thanks!-PhilThanks!

Hi NetPro,anyone can explain to me why ACS 4.1 can not install on Vmware ? what is the impaction ? any support document to prove that ? your reply will be highly appreciated.regards,Jackal

Hi all,I have the following problem I have a Win 2003 domain (A) and a trust established with another Win2003 domain (B). Domain A is the one with the CiscoSecure software.We have many trusts with other domains (mostly Win 2000) and haveconfigured th...

I have integrated MARS 4.3.1 with ACS but I need to know how I can assign privilege levels for the users on the ACS for different privilege on MARS.

HIIn my router I am configure AAA authentication default login and default enable password from ACS. so when I login my router then login password and enable password come from ACS. I am also configured login default local. my problem is if ACS down ...

Hi,We have Two DataCenter one in INDIA and another in HONGKONGWe want to deploy ACS at both location and ensure if ACS Server in INDIA is down then users can connect through HONGKONG ACS-Server.....<Q1> How many licenses do I need for ACS <Q2> How wi...

I'm currently experiencing problems with the installation of the ACS-certificate on the client. I'm using an external CA-certificate that is correctly installed on the ACS-server (see other topic). Now the clients also needs the ACS-certificate to be...

We have read from the installation guide for windows ACS 3.3 and understand it is supported only on Win 2003 standard edition service pack 1. As MSoft has release Service pack 2, not sure has anyone out there tested ACS 3.3.4 on windows 2003 standard...