Network Access Control

HI I have a problem with my configuration. can someone help.I have a freeradius, pix and vpn client and i install the radius to authenticate the vpn users. i tested the authentication from the pix to the radius OK but if I want the vpn user to authen...

Hi everyone!Equipments involved:Cisco ACS 3.3 ApplianceMicrosoft Active DirectoryAironet 1200 APIBM Thinkpad T42, WinXP SP2Authentication used:WPA/TKIP/PEAPSupplicants:Thinkvantage (4.12)Odyssey Client 4.32Windows PEAP SupplicantProblem:How to push n...

Hi,I have recently implemented ACS 4.0 for autentication of remote access users. Our helpdesk have found a slightly niggly issue that I am wondering if anyone knows how rectify.Issue below:-A user is created in ACS who is authenticating against the A...

HelloDoes anyone know if there is any effect when Cisco ACS service pack is upgraded for version 2 to 4 on windows 2000.This is especially if users authenticates through Active Directory

I try to establish a link to an external database by LDAP SSLI put all information in the common LDAP configuration, I set the port to 636, Checkmark are on LDAPv3 and Use SecureAuthentificationI put the path of my .db fileBut when I try to map ACS g...

I'm in the process of evalutating RSA SecureID and Radius server verision 6.1 In order for my new VPN Client to use RSA for Radius Authentication. I have to move the order of RSA Authentication server to the top of the list of authentication servers...

Hi all,The customer have a Win 2003 domain (A) and a trust established with another Win2003 domain (B). Domain A is the one with the CiscoSecure software ( ACS v3.3.3 ). These two domains are both pure win2003 mode.But when trying to "add mappings" f...

There is small branch which is connected to central place. Branch is connected by DSL and PIX 501 using VPN.Now i need to auth local users and give them access to corpo network (NAC will be great but just 802.1x is also ok) and some guests (laptops w...

Hi guys, is it possible to set up 2 factor authentication using a tacacs+ server in the pix firewall? only want to use a tacacs+ server using aaa on the pix.

In prev. IOS 12.2(17d)SXB10 e.g. a C6k had a syslog MSG for a failed SSH Authentication(%SSH-5-SSH2_USERAUTH:)This MSG is no longer present(in 12.2(18)SXF). On a 3750 e.g. there is a command "ip ssh logging event", which brings me back this log msg. ...

All,I have my VPN working but I don't want everyone to log in using a common group name and password. Can I use my ACS box for authentication for incoming VPN connections?

Someone could explain me that problem could have, if I have the following situation: A dhcp Server, ACS Server, and various switches 3750 interconnected. But a hosts in the network has assigned statically one of the directions that the dhcp Server c...

The logs are being created, but they are blank. TAC says its because my remote agent is on Windows 2003 SP1, they say SP1 is not compatible. Any one else run into this?

hi folks,is it possible to configure db replication between the ACS 4 appliance & the ACS 4 windows db? any caveats, gotchas or field experience?would this also work with ACS load balancing, using both the solution engine & the windows db, as long as...