Network Access Control

Hi,Is it possible to assign a static ip addres to a VPN client using ACS server. The scenario is when a user connects to the VPN server and is authenticated by ACS server he should take the ip address defined in the user database instead of taking a...

i am using acs3.2,but i find a question aboutNetwork Access Restrictions.i edit Network Access Restrictions in shared profilecomponents,then i Select the Define IP-based access descriptions check box.i choose aaa client,type the applicable informatio...

I had two aaa usernames i delted, now i don't have any. I then changed the secret. I went to log back in and it's asking me for a user name even thou I delted both of them. I typed in the old username with the new secret and the old user name with...

Dear all,I want to use Cisco-AVpair from ACS radius to get the modem connection time (time-start like TACACS+).Could you help me how to do that.Thanks

I have dot1x port authentication enabled on a 3550 and it works, sort of. My XP workstation can access the network (I can browse, ping, telnet) but the domain login script does not run or has timed out and I lose my drive mappings. Any suggestions?

Before I used 2600 as ACS server client and using FastEthernet 0/0 as AAA Server authentication interface 。Now I want to change FastEthernet 0/0 to Loopback0 interface as authentication interface ，I couldn't found out any command can sepecify authent...

Hello folks, Has anybody tried ACS 3.3 for Windows on VMWare? Your experience is wellcome. Best regards

I have a pix 501, with vpn users authenticating off of MS 2000 IAS. Works great although I want to filter a few users to only be able access a couple PC's when they come in through the pix.I created a new group on NT called Vendors, added the users ...

All,I have my ACS loaded on a Win2K server and when I log into a router is it true that the router is the NAS device and that it (the router) sends the username and password information to the ACS server for verification? Also is the information bein...

The following environment is given: Cisco Secure ACS 3.3 Solution Engine, Cisco Accesspoints 1231G, Cisco 2950 Switch,Windows XP Clients (SP2) and a Active Directory Userdatabase. All componentscan communicate with each other. Active Directory is con...

I am wondering if we are going to see or now have the ability to authenticate hosts on the lan with something other than a Username / Password? I am mostly concerned with ports on my network that the end device is a non 802.1x compliant device. Anyon...

I am having problems installing a certificate on the ACS 3.2.2 appliance.I generated a certificate request on a Windows server 2003 certificate server as per the ACS instructions. Got the sertificate and installed it on ACS without an issue (that I ...

Hi,IS ACS version 3.2 compatible with Windows 2003 server?Is there a guide on how to configure it?Thank you.Regards,Ron

Good dayIs it possible to configure, the router 2800 as server aaa and apply pin for authentication ?Any suggest will be appreciate.