Network Access Control

Hi.I have the command above configured on my router:aaa authentication enable default group tacacs+In my ACS 2.6, where can i configure settings to enable password per group ? I don't want to use settings per user.Tks.

How can i access the Switch in the case that the Switch lose conectivity with the Tacacs+ Server?The AAA Configuration of the Switch is the following:#authenticationset authentication login tacacs enable console primaryset authentication login tacacs...

Greetings,Is there a way to obtain a complete list of ACS user names short of going screen to screen in the GUI? I guess I'm thinking along the lines of the .csv logs accessible via imports to Access or Excel.Thanks

We have a Cisco ACS 3.2 server authenticating against an NDS tree that is connected to out side via an international 128k frame circuit. We are unable to successfully authenticate to a device with a user that exists in that tree.We are able to authen...

If you have a Cisco IOS device (an IOS access point, for example) that authenticates users to a primary ACS server then how do you configure this IOS device to send these user auth requests to a backup ACS server when the user is not a configured use...

Can I have a aaa config to authenticate console user locally for enable authentication. aaa authentication login conuser localaaa authentication login vty tacacs+ localaaa authentication enable default tacacs+ enableaaa authorization commands 1 defau...

Hello,We're using ACS to manage authentication for an Aironet 350. The group and users in ACS do not have any time of day restrictions set. Thecheck box is not selected and according to the docs, that means that there is no restriction in place.Can a...

I have perused the networking forum looking for information on authenticating users traversing a PIX-PIX vpn tunnel. I have seen several threads discussing remote IPSec client authentication using RADIUS/ACS/RSA servers, but have not found much, if a...

Hi,I have a ACS 3.2 server. Everytimes after reboot the ACS 3.2 server, the "Tunnel-Type", "Tunnel-Medium-Type" and "Tunnel-Private-Group-ID" configuration in each groups would lost. Can you give me some advise to resolve this problem?Best Regards,

Can i configure ACS groups with radius attribute 11 and filter aironet350 clients ?

Anyone know How to set tunnel tag from 0 to 1 on IAS?Thanks and Regards

I would like to define Group NAR to prevent Users from this Group to Access a LMS & ITM management stations. Although I succeeded to define NAR to prevent users to access some CISCO switches or routers, the same NAR configuration doesn't work to prev...

Does the ACS Server in anyway correspond with LSASS.exe from a Windows 2000 Server.With many Wireless Clients (25to30) this process is running up to 80% CPU usage.Any Hints?Thanks

Cisco´s official statement about supported Service Packs for ACS 3.2 under Windows 2000 is:"The computer running Cisco Secure ACS use an English-language version of Windows 2000 Server with Service Pack 3 installed."Is SP 4 also meanwhile supported? ...