Network Access Control

From the command line using CSUtil.exe is it possible to disable a users account? Is it possible in ACS 2.6.4 or 3.x ?We want to be able to program the disabling of users account as necessary. Any suggestions would be appreciated.Thanks

Hi, in the past i installed several ACS Servers with the User Changeable Password (UCP) Add-On. Usually the Add-on was installed on the same server as the ACS, but this time i need to install both on different servers which is supported according to ...

Hello,I have RADIUS authentication working for SSH logins on my routers, but I'd like to use RADIUS to authenticate for enable access, as well, so that I can have users who can do some advanced troubleshooting on my equipment without getting in too d...

Dear Sir:I have a problem with ADSL authentication , I user radius NT and My LNS router is Cisco 3660 has IOS version "c3660-js-mz.122-10.bin" the problem is suddenly the ADSL users can't login to when I made a debug for radius I saw that the radius ...

I have a setup for ACS and Concentrator, with cisco vpn client. Accounting and Authentication is already setup inside ACS, and i would like to setup Authorization too. Does ACS handle authorization for RADIUS client?thanks in advance. look forward fo...

We are currently implementing a remote access service for our organisation, the service has been scaled to accomodate a user base of 11000 customers.We have set the Access control servers up such that they are responsible for the allocation of IP add...

Original configuration was one 3640 connecting to 2 2611's using IPSEC using software alone. ISAKMP authentication was by rsa-encr. Was found to be too slow. one nm-vpn/mp and 2 aim-vpn/bp were purchased. Apparently the nodes now can only authenticat...

I know this might sound a little weird, my ACS server is outside of my concentrator. Inorder for me to use it to authenticate remote vpn client connection, beside UDP 1645 in/out, what do i need to open on the public filter? look forward for any sugg...

looking for some coonfigurations documents

Is it possible to extract a list of users from the ACS database? I can view the users and groups, but I need to provide a comprehensive list of all users.

Can anybody please confirm if it is possible to have a single User_ID authentication to different databases dependent upon access mode. I would like to keep all users to be authenticated against an ACE SecureID server for Dial-Up access and against a...

Being new the AAA realm, I'm having some difficulty with getting my client to authenticate to my TACACS+ server. I can however, authenticate via username I've placed in my router config. Both my server and client are setup to utilize TACACS+. Here's ...

Hello ,I wanted to know when I install ACS 3.0 does it block ports 137,138 and 139 .If so how do I prevent this.Thanks.

I want to enable per user VPDN's by assigning the tunnel attributes, HGW etc. via Radius. I'm using a 3660 with IOS 12.2(4)T3 as the LAC. If I create the vpdn-group etc it works fine. But when I only have 'vpdn-enable' and 'vpdn search-order domain' ...

hi, How to replication database on ACS 3.0 (Unix, Solaris) ?best regardsfred