Network Management

Hello everybody, We are trying to distribute the suggested ios-xe versions on our network devices though Prime. On our software image management server, sftp and scp are configured. When I start the process of distributing an image, I get the followi...

I have  Cisco IE-3000-4TC switches in a traffic light cabinet that is daisy-chained to other IE switches along a path. Our fiber provider did work on the fiber between two of these switches and now the first one keeps causing the next switch to go do...

We are preparing to deploy a new system. I apologize if I don't word things correctly when trying to explain this, but honestly the most I've done on phones has been static configs and configuring port for VoIP VLANs. This rollout we have ESXi, VMs, ...

Hello...do try to get the subscription working on my two switches IE3300 and IE3400...version is 17.7.1 tried also the newest one ..Goal ...set up a simple test getting the cpu uit. from the switch...and send it over port 57500 to my notebook which r...

After using express set up on a new 3650 switch, I try to access the webui, I get a prompt for secure access. If I chose yes I get the following message: xx.xx.xx.xx uses an unsupported protocol.ERR_SSL_VERSION_OR_CIPHER_MISMATCHIf I choose non secur...

Hi everyone, So I made a post earlier about the cisco equipment I was given, which contains a 2811 with a WLC and some 1142LAPs and I got that set up pretty well  (thank you marce100 for the help). Now I wanted to see if I can integrate this with a U...

Getting the following Syslog message from ASR 9000484172 LC/0/0/CPU0:Sep 27 13:41:50.261 UTC: pfm_node_lc[393]: %PLATFORM-FCA-2-READ_TX_RX_TIMEOUT : Clear|lda_server[4868]|0x1070005|Device driver for device 'LS_poller5' detected IO timeout for read o...

Hello, I build simple network using Cisco Devices (Router C921-4P and 2x Switch SG220-26).First of all I configure my Router just to have connection on WAN and LAN ports. I connect ISP to the WAN port (gigabitethernet 5) then I connected to the Gigab...

Did anyone measure the actual power consumption of a C9300L-48P or C9200L-48P?I have 2x C9300-48UXM stacked switches with 70 active interfaces and a POE load of 210 Watts. The total power draw of these switches is 370 Watts. Each switch draws ~80 wat...

I am working on a project in Packet Tracer, and I'm running into an issue where I am unable to edit the global policy of the 5506 firewalls I have configured.When I issue the command "policy-map global_policy", it returns "ERROR: policy-map/policy-ma...

#show startup-config on our Cisco 897VA produces this:ip dhcp pool school-dhcp-poolimport allnetwork 10.10.10.0 255.255.255.0default-router 10.10.10.1dns-server 208.67.220.220 208.67.222.222lease infinite!ip dhcp pool talkswitchhost 10.10.10.199 255....