Network Management

I am trying to set the status of tracked object using action_track_set command available in EEM TCL. Relevant configuration from the router is below:track 203 stub-object default-state up!event manager environment _test_track 200event manager environ...

HiIs LMS 3.2 supported on VMWARE esx version 4? is it tested by Cisco?Thanks

hellois it possible that rfc 2544 test provide 100 or 99% result on running network? i also need the requirment for this rfc 2544 test?

Sir,we are connect our LMS 3.1 portel thru our username & which is created on TACACS ACS. I am admin user and when I changed into map as per our network diagram.1. our other team (users) can get same updated map when they are login thru their usernam...

Of what happens when you use the TFTP transport protocol to gather configurations from a device? Does SNMP RW have to be enabled?

We're standing up a new network and I'm not having any luck getting Radius to work on my switches. It seems like the switch isn't even attempting to contact the Radius server, because when I attempt to ssh into the switch, then do a "show radius sta...

LMS 3.1 / CM 5.1.3We have a lot of Alcatel phones on wich a PC is connected. So there is a Data Vlan (234) and a Voice Vlan (853). In end user report all connections are shown in the data vlan.Anyway, The vlan port assignment data (operational tasks)...

Hello. Has anyone seen any performance issues when running LMS 3.1 on the T5220 servers. If so, can you tune Ciscoworks that is works better with the server.

We are using cisco-works 3.1 and we would like to change our network topology view devices icon sizes. i.e. core / distribution / access switches.

Hi,does anybody know if an ios router can send traps if interface level rate-limit thresholds (like "rate-limit input access-group 110 3000000 10000 10000 conform-action transmit exceed-action drop") are exceeded?Am I right that the normal snmp agent...