Network Management

Hi, Currently, we are reviewing our network management system in which we're looking at HP Open View NNM 7.51 and applications like NCM and RAMS.We would like to make comparison with HP Open view solution with the existing systems such as stated b...

Hi AllI would like to forward syslog to other Server for only few device not for all.How i configure at CiscoWork2.2 ?ThanksIttiphol Chanaphai

What's the conf reg required to enter in to rxboot

Hello, I a new administrator of CiscoWorks. I have installed CiscoWorks LMS 2.5.1 on Windows 2003 and I am attempting to configure SNMP in Campus Manager. For to add the SNMP community I go to Campus Manager > Administration > SNMP settings. In this ...

I'm wanting to monitor our 3 WAN links for utilization, etc. Is there are good, fairly cheap tool out there to do that.Thanks

When trying to verify my Directory it points to:/var/adm/CSCOpx/files/rme/dcmaIs that correct or Do I have to point it to:/var/adm/CSCOpx/files/rme/dcma/shadow.Is there a Web Access to all my config files?

Can i operate CNR with VMWARE or with virtual server?

I know from an earlier thread that Cisco's position is symbolic link is not and will not be supported with /var/adm/CSCOpx, so my question is: What's the danger (if any) of manually re-establishing /var/adm/CSCOpx as a symlink to the real file system...

When I have discovered with the collector data the equipment leaves the disordered equipment and connections and been able to be placing the equipments of a ordered way but with himself not to be able to move or to readapt the links between equipment...

Hi everybody! I am evaluating CUOM 2.0 integrated with ACS 4.0. I have added two clusters and I have created three users (two of them has full access to only one cluster and the other one has full access to every cluster).The problem I find is that I...

I'm creating some rather complex nested dynamic groups and was wondering if there were any way to export them or export them...the gui isn't bad, but if I could do them all offline and then import them into the system that would be so much better to ...

We have a network that is rapidly approaching 255 IP devices. We have no Windows servers, so the only networking we do (on the Windows side) is PTP. I am ready to start a migration to change all the subnet masks from 255.255.255.0 to 255.255.0.0 so...