hi
i am new on lms3.0, i have an problem ,when i log as an administrator i have this message "message You do not have the roles required to access this portlet" in all portlets heading
i have no idea how can i proced
please any suggestion
tha
nk...
Hai i was trying to integrate NAM3 on 6513 with our prime 2.2.0 server,following issues noticed
1. I am not login to NAM,i correctly configured,its asking privilege 15 access required,any ssh patch need to be installed,on NAM i didn't install any p...
Lately we have experienced a pop-up error on some user accounts, but not all accounts.
It is consistently giving a pop up with this error message.
Any help will be appreciated greatly.
=> sun.reflect.GeneratedMethodAccessor632.invoke [null -1]
=> su...
Hi;
I am Trying to configure snmp V3 over nexus 9000 switches running 7.0(3)I1(3), it seems that The priv option (Privacy password )along with the aes-256 is not supported through NX-OS.
can anybody advice me about that as this is required from the c...
Originally there was a problem with connecting to the mail server and the following error would generate as a result of testing the script:
*Oct 2 21:34:12.937: %HA_EM-3-FMPD_SMTP: Error occurred when sending mail to SMTP server: smtp.mydomain.com ...
I'm using SNMP to periodically check switches for static MAC entries. I just discovered that our new WS-C3850-48U devices running IOS 03.03.05SE do not return data when queried for the dot1dStatic (1.3.6.1.2.1.17.5) table. An snmpwalk command from a...
Hello
We have a problem with our new Switch WS-C3850-12XS . We try to put it into the cisco network assistant but we only get the message
"Unsupported Device".
network assistant version : 5.8(9.1)
Originally there was a problem with connecting to the mail server and the following error would generate as a result of testing the script:
*Oct 2 21:34:12.937: %HA_EM-3-FMPD_SMTP: Error occurred when sending mail to SMTP server: smtp.mydomain.com ...
hi
i have an lms 3.0 installed and have many problem on it, i thought that update it to current version can help me, but i do not know if that need to buy a new licence
can u suggest me ?
thank u
Hi,
We are unable to received Active Supervisory failure alarm to Cisco Prime 2.2 Server, when we do soft reboot or remove Standby SUP engine from Cisco 4507 chassis then alarm report properly however when we tried to do same thing with Active SUP i...
Hello House,
I have a couple of devices I want to monitor remotely using Solarwinds or PRTG. I need to configure SNMP to get it to work but don't know How.
I tried the following commings but it didn't work
access-list 100 permit udp any eq snmp des...
Hi All,
I have an issue with netflow coming from a Nexus 5k at one of our client's site's.
The 5k is setup to send netflow to a Cisco Prime server sitting on site. Cisco Prime sees the device as a data source, but no flows are shown in the data so...
Hello together,
We are currently making changes as we were slightly behind with our network. We have ordered a ASA 5585, Cisco SNS (Small Network Server)...and we use a nexus 3548 as our router which connects to several switches across the campus (al...
PRIME INFRASTRUCTURE does not relay all SNMP traps from WLC. Specially the high-availability related SNMP traps. WLC generates the traps, but the PI does not relay them.
WLC HW version 5508
WLC SW version 8.0.120.0
PRIME SW...
If I were to monitor large number of network devices using SNMP protocol, what's the bandwidth SNMP will utilize for each devices, assuming the SNMP poll interval is 60 seconds. Is there any tool available for the capacity planning?
