Hello everyoneI want to know if you change your clock configuration each year or not ? I mean what do you do to change the summer-time each year? Because the date and the day will change every year.I mean, this year the summer-time is : 10 Mar and 3 ...
Forum Posts
Hi, I am currently building a voice network with some adjustments in Packet Tracer, but I came across this problem.In the typical VOIP configuration, it seems that most people use a router (2811), a switch, and then the IP phones, but in my case, I w...
Hey all! One thing I have been tasked to do is to come up with a best practice configuration for all of our Cisco equipment. We are a cisco only shop, and have ASA, Cataylst switches, ISR 4321's, 8200L, and some nexus switches. As it stands, our equi...
Historically I've heard of certain commands appearing in a different order for the same device configuration. In the startup config for instance you might see subcommand B before subcommand A, even if for the same configuration you used to see A befo...
Hi,Im fiddeling with various EEM applets and feel a bit held back by the lack of documentation. Or maybe my google-searching skills have declined. First: Is there an official documentation of variables somewhere? So far I have pretty much brute-force...
Hello everyone,I am new to networking and currently working toward getting my CCNA certification. I decided to purchase some Cisco hardware to get hands-on experience by building a home lab while following a course and reading the CCNA book.To make a...
Hi Guys What I'm trying to achieve: 1. Every time an engineer runs the write-memory command, a copy of the running config is sent to my SCP server. 2. Every 7 days, a copy of the running config is sent to my SCP server. 3. The password in confi...
Hi All, I purchased a Cisco Catalyst 1000 Series switch model C1000-16P-2G-L just recently. I was so excited to get it that I didn't do any setup, just literally unpacked it, plugged the power onto it and plugged in all my home networking. ...
My boss told me to reach out to Cisco or the Cisco partner that Installed the router for my company, but it has been over 10 years that they installed the current router in my company, and I could not find the contact of they company that installed t...
adquirí 3 router, lo configure a través de consola, funciono muy bien como repetidor Wi Fi, pasado unos años de pronto comensaron a parpadear las luces de verde a naranja y a rojo y se perdio el Wi Fi. los resetee volvi a configuralo pero con la wi f...
The 2911 router will not turn on, even though the power indicator is on. When I leave it for some days with plugging it to power and I plug to power after some days, the router will power up. But after somedays it will not power on again.Please, what...
I teach Netacad CCNA level courses and a problem we run into is with 4 or 5 courses sharing the same hardware, students will use dumb passwords, forget them, & then we have to do the annoying romon fix.I researched setting up an applet that would del...
Resolved! Catalyst C3560-x IOS Upgrade problem.
Hello. I have some c3560-x switches working ok. I wanted to upgrade IOS on them. Don't remember now what ios they were using, but i've tried to update to c3560e-universalk9-mz.152-3.E1.bin All of them updated succesfully, except one. On this switch "...
I'm testing an EEM applet on an IOS-XE switch and I'm having trouble getting it to trigger when an interface changes state.The basic event I'm testing is an interface state change, and the applet should simply write a syslog message when the event oc...
I'm looking at ways to make routine network changes a little safer by automating some of the checks that are normally done manually.For example, before making a change, I'd like an EEM policy to verify a few conditions such as interface status, reach...
