Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Hello,I need to learn about logging and viewing the logs on an ASA5505.  I am new to this  - in general, I think logging means to track all traffic inbound to the firewall and then save it somewhere so I can look at to see what is going on.  Can some...

  Hi Everyone,We have Internal DNS server that goes to ISP via our Internet  ASA for DNS lookups.Recently physical connection between our Internal DNS server and Internet ASA broke due to bad cabling.When users try to open website they get message pa...

mahesh18 by Level 6
  • 602 Views
  • 5 replies
  • 0 Helpful votes

Our office has a number of remote employees that use ASA 5505 boxes to access resources and connect their IP phones to our office.  These boxes all connect through a pair of redundant ASA 5510 firewalls.  When we configure these 5505 boxes, we used t...

Matt Hoak by Level 1
  • 663 Views
  • 4 replies
  • 0 Helpful votes

Hi I have a class c 1.2.3.0/24 that i have on the internet side of my asa5520 currently I use object nat to translate 1.2.3.x to inside addresses like 10.10.24.x I want to route one of these addresses inside now so 1.2.3.10 is NAT to 10.10.10.241.2.3...

Hi all,we have installed new MS root CA and issuing CA (Windows Server 2008 R2 Enterprise) . When I tried to get CA certificate from some Cisco devices Cisco WS-C3560-24PS it fail.Debug: QL-SW3(config)#CRYPTO CA authenticate ESSAUDE                  ...

Hi, I'm stuck, here is what i need:host1: 192.168.1.1 service tcp/443>>>>> public ip 1.1.1.1 service tcp/443host1: 192.168.1.1 service tcp/80>>>>> public ip 1.1.1.1 service tcp/80host2: 192.168.1.2 service tcp/22 >>>>> public ip 1.1.1.1 service tcp/2...

Hi,I have gotten a rather unusual request and wondering has anybody come across it before and if it is technically feasible?  We have a Cisco ASA Firewall that terminates remote access clients using an anyconnect ssl vpn on the outside interface.Ther...

Hi everyone,I have a problem configuring a cisco ASA 5510 - 8.4 :I have attached a picture of the network :Could you help me with the configuration needed to have the host within the DMZ subnet talk to the PI server and vice versa.at the moment I can...

LAN traffic is going through the ASA5512 fine, onto a single switch and then to servers.We are trying to NAT some internet IPs to VLANs, and the connections are timing out. The connection is built as below but the only packets captured on the vlan-10...

Resolved! acl

Shouldnt this acl permit tftp from host 10.0.0.68, but deny any other tftp request? and also permit any other request other then tftp?access-list 100 permit udp host 10.0.0.68 eq tftp host 10.0.0.82 eq tftpaccess-list 100 deny udp any eq tftp any eq ...

Hi,  I have a Desktop with ip:10.10.3.4 in my network. In this PC internet working. when i try to add the NAT command in Cisco ASA 5510 -  in this scenario 10.10.3.4 to some public ip X.X.X.X (one to one natting)static (inside,outside) X.X.X.X 10.10....

ahcimran1 by Level 1
  • 736 Views
  • 4 replies
  • 0 Helpful votes