Network Security

HelloWe are currently running ASA9.0(3)ED on our firewalls.  This is the latest release in the 9.0 train on the downloads page, dated 22/07/2013The bug above is in the latest set of advisories released 13/10/2013http://tools.cisco.com/security/center...

I have been getting overrun errors on 3 different ASA 5550 HA pairs with traffic rates less than 100Mbps total.  I was told by one TAC guy to split the traffic between the two slots so that traffic comes in one and exits the other to maximize through...

Does anyone know if it is possible to use Cisco ACS version 5 to provide identity service for ASAs identity fw?             

I just recently tried to upgrade the code version of a 5510 from 8.3(2) to 9.1 and got this error: This is an ASA image and cannot be loaded on a PIX platform.I was consoled into the firewall and watching it boot up, after that error it just said "re...

Hello,We currently have an ASA 5510 as our edge firewall that is connected on e0/1 to our core switch, a 4510R+E. The connection from the ASA is to an access port (vlan 99) on the 4510. I would like to migrate this configuration to subinterfaces on t...

Hello,I have two ASA firewalls configured in failover. I was trying to install software CX module on both. However, on secondary ASA its giving problem and not showing up in the "show module cx detail". I am attaching the output of same command on bo...

I have a tunnel created and I need to NAT the local network 192.168.1.0/24 to 172.31.196.0/24 to the destination IP, let's say (2.2.2.2)code version is 821name 2.2.2.2 External_IPname 172.31.196.0 Local_xlatedI thought the statement would look like n...

Hello, I'm new to Cisco ASA devices, So i hope i am posting this in the right area. Heres the problem I am  having.  I have a spare 5510 device, that I am playing around with to learn the system. I was able to get it back to factory defaults (config ...

Hello,I have two ASA firewalls configured in failover. I was trying to install software CX module on both. However, on secondary ASA its giving problem and not showing up in the "show module cx detail". I am attaching the output of same command on bo...

hi therewe have a cisco pix 506e but i am unable to log into the web front end. i am led to believe it is to do with the version of java installed. but i cant get the web front end to work. can someone help me access it, please?thanks gary

I have one ASA which is for client VPN connections and site-to-site VPNsI changed its IP address, now i'm not able to connect to it.Here is the detailvlan522 <=> SW1 <=> g0/48(10.40.251.2) <=> e0/1 (10.40.251.1) <=> FW1-ASA 5510FW1-ASA 5510 has futhe...

I cannot access the internet with my current configurations.  Clients on vlan100/101 can obtain ip address but wired clients cannot access outside.  What's weird is that I have mobiles devices ran off a Ruckus ZoneDirector and wireless APs in vlan101...

hiI have couple of issues1. System time - it shows a weird time, we are in CEST and last weekend changed time to winter time ..this the configuration I see on the system context on ASA. how do i change it to reflect the current time..gvadc-fw# show c...