Network Security

I have a customer that has an asa5505 who purchased the ASA5500-SSL-25 license.He is now going to replace/upgrade to a 5510.Can he just install the license on the new ASA, providing that he gets some trade-in on the 5505orDoes he have to purchase it ...

Does Cisco still provide Letters or certificates of Volatility? I am currently documenting a deliverable system that utilizes both Cisco Catalyst 3560’s (WS-C3560-24TS-E ) and Catalyst Express CE-500’s (WS-CE500-24TT). I am looking for letters or Cer...

Hi,I would like to restrict Internet traffic (HTTP & HTTPS) for Inside Users with an ASA 5505. I would like to setupa proxy-like system where a User/Password must be entered before the User can actually browse the web.I know that this can be done wit...

Hi,we have a pix firewall (515e) and we are trying to access an application on citrix at the other end of the firewall.on dooing a caputre on inside interface,  can see the packets hitting the firewall but again on capturing the outside interface, ca...

Hello,I have a strange error on my IPS, and can’t find reason.Analysis Engine is Busy Processing Stage 3 of 97 at Step 0 of 1Messages, like this one, in the category - ct to sensorApp timed out - were logged 1 times in the last 0 seconds.  name=errUn...

Is there a way to access a PIX 515 by remotely SSHing to it restart it?

Hi All,I have a ras vpn for remote users and have site-site vpn for my branch offices . Here my requirement is if any user connetcted to ras vpn also be able to reach other branches via site-site vpn. My inside subnet is 192.168.1.0/24 and my branch ...

Hi Group,I currently have an ASA configured in production within my network that is set a bit high (200K msg per/hr) in respect to logging.  My issue with this is that it pretty much has rendered our syslog server useless...too many messages...sortin...

Thanks for taking a look at this,We recently installed a Cisco ASA-5510 with 8.0(4) with a  CSC module.Although it does in fact block users from restricted sites it does not tell him in the CSC Events what site it was that got blocked from the user.D...

Hi,In a redundant FWSM setup, do I have to buy 2 licenses or may I use the same licence for both boxes ?Thank youYves

Hi, I would like how I can allow the ICMP Redirect ( type 5 ) on my ASA LAN Interface.PC from LAN have ASA LAN interface as gateway and have to join another Router behind.I need to allow this traffic. Thank you

Hi,We have two Ironport ESA devices, we have to make our MX pointer (Currently there arre two MX pointers) redndent with these devices.  So I would like to know how should be the pointing towards the IronPort ESA to be done to make my mails redundant...