Network Security

hi,my outside interface is not synchronizing properly, can someone let me know what I could be missing?secure1/production# sh failFailover OnLast Failover at: 08:14:52 UTC Oct 11 2008 This context: Failed Active time: 0 (sec) ...

Hi,we recently switched our ASA administration from ASDM to CSM 3.2.1.In the ASDM you can set for VPN Useraccount the Group Policy, a dedicated IP address etc.The problem is, I don't find that in the CSM! In the masks of the user accounts I can only ...

Hello,I have recently upgraded my AIP-SSM-20 modules to 6.0(5)E2 at the recommendation of Cisco. I have 2 ASA5520s in single-context mode in an Active/Standby configuration. 1 module in each FW.I have the IPS in promiscuous mode at the moment because...

Hi,On the concentrator it had a great tool caleld "filterable event logs" to see why users were having issues logging on the VPN and the same for the site-to-site links.How can I do this on the ASA 5520?Thanks

Hi..I need to connect 10 sites with no web portal,public users...which is better between lease line or VPN ..is there a need of firewall?...Does VPN also covers the L4-L7 securities ??..should I go for lease line or VPN ??When I go for VPN, still the...

Hi,I would like to know if IPM ( ciscoWorks) supports the scheduling of probes.For example:ip sla monitor schedule 1 life 300 start-time after 00:05:00ThanksrgdsAbdelBskyB Uk

Hi,I've purchased a 16MB ISA Flash Card for a PIX520 to operate in a QA environment. Reading the instructions, it states that it comes with Pix 5.2 preloaded. I've removed the old 2MB card and installed the 16MB but when I boot the PIX I get the usua...

Hi Everbody My ASA 5510 with the CSC module has a Problem with FTP download. I use normaly FTP Protocoll to download files. The Problem is, it intercept the Filedownload after a certain time. It look like a timeout. the download goes from the Interne...

Hello:I am having problem with the CCAAgent download page. When users access resources on the network, for the first time, they are directed to the Weblogin page without an option to download the CCAAgent. My environment is OOB virtual gateway with H...

Hi - I am new to Cisco NetPro forum,I have a dilemma/question relating to bridging two networks utilising an ASA 5505 device.We are in the process of connecting two MPLS networks with a 4Mbps link, for example:MPLS 1 Network address is 172.100.0.0/24...

Hi all,I have seen this a lot with routers and PIXs. Traffic with a source port of port 80 and destination of a dynamic port is denied on the outside interface.The traffic is from legitimate web servers that users are browsing through the NATed inspe...

I have a Cisco 5510 that has a DMZ setup on it and supports Remote Access via the legacy client, not web or SSL. While on VPN I can get to all internal resources, have no problems. However I cannot conect to any resouce in the Dmz. I've look at the N...

Hi,I was reading CSCse92254 Bug Details and it says that ASA OS version 8.3 is released. I quote part of the bug detail as follows "- IKEv2 is a much better solution and will be implemented both on the AnyConnect Client and on the ASA. Dates have not...