Network Security

I need some help with cisco netflow, I wanted to know which routers support cisco netflow, or are capable of utilizing cisco netflow.

Moving from Checkpoint to ASA. Migrated about 20% of my policies earlier this week and had to back out one. ftps from 10.60.10.205 (inside) destined for 65.217.149.5 (prod-outside). Users got error message 500 Illegal PORT range when entering pasv...

I have a Linksys RV082 with a dual-WAN setup, connecting back to an ASA 5510 via VPN. The Linksys VPN configuration connects to the ASA on the WAN1 port primarily, and has the backup tunnel defined as connecting to the ASA via the WAN2 port. The ASA ...

I want to purchase an ASA-5505 to support one VPN tunnel and under 10Mbps of traffic.What model do I choose

I am working on an upgrade script to take my PIX 515E from a restricted license 6.35 to an unrestricted 7.24. This is a mission critical piece of equpment so I want to make sure I am doing it right.Below is what I have from a 30,000 ft level came up ...

I just set up a site-to-site VPN tunnel, but cannot access ASDM at the remote location listening on the internal interface 172.19.0.254.I also have an access list allowing my home subnet of 10.0.0.0/16 into the External interface to 172.19.0.254.Than...

Trying to figure out why i cannot ssh to my pix501 from a outside connection!any ideas?PIX Version 6.3(5)interface ethernet0 autointerface ethernet1 100fullnameif ethernet0 outside security0nameif ethernet1 inside security100enable password xxxpasswd...

I have recently purchased 851 router. But i am facing issues while configuring it from SDM every thing is ok i have assigned Ip to my vlan and wan port the only issue is ,while configuring the firewall auto policies it gives me strange errors like th...

Hi guys,Please can someone assist with the following issue. i dont know why only one machine in the 10.10.10.x range passes traffic via the tunnel while the rest does not. I have the following nat policy configurednat (inside) 1 access-list xxxgloba...

Hi,here's the scenarioI have a 5510 as the default gateway for the network, on 172.89.31.1/23There is another 5510 on the network on 172.89.31.2, this is the gateway for another network 172.89.82.0/23.There is one host behind the second 5510 at 172.8...

HiI am trying to get RADIUS traffic thru and FWSM.Inbound:interface Vlan817 nameif NetworkServices security-level 20 ip address 10.128.1.81 255.255.255.240 Outbound:interface Vlan777 nameif TestLDAP security-level 100 ip address 10.128.1.129 255.255....