Network Security

I'm swapping firewalls for a customer. Taking out a watchguard soho and going in w/the 501. As of now all clients can get out but the server cannot ping past the internal interface. Here's the config:nameif ethernet0 outside security0 nameif ether...

Hi all, this is the second day of our PIX's use as a VPN gateway. Until last night around 11:30, all was well, but since then, we get varying error messages on win2k clients (that's all we're using). Today, I inspected the syslog files and noticed ...

I have a pix that I am adding to a new network we are building. It needs to connect to the internet through the ISP's birdge which is a Linux box and is a wireless connection. I added a nat, global and default route on the pix. I can get out from the...

Has anyone done a comparison of what would be the tradeoff of terminating VPN connections on a Cisco 3660 Router instead of a PIX 535. Could the 3660 with an IP/FW/IDS PLUS IPSEC 3DES IOS handle the same load of a PIX 535. We currently have around 16...

What kind of cable directly connects a PC and PIX?

Hi everybody,I have a PIX firewall with two interfaces. The internal uses NAT. Everything looks to be ok except for the outgoing data transfers from the inside to the outside subnet. The transfer is interrupted after some few hundreds of KB transferr...

Hi,I have a pix525 with firewall version 6.1(1) and Device Manager version 1.1(2) both installed. Have also configured http access for my PC. License key is also capable of DES and 3DES. When I try to connect to pix from my browser, I get this error ...

Hi,Here's the problem we experienced earlier today. It first caught my attention when users were complaining that they couldn't get to the webservers, which resides on the DMZ. So I tried to telnet to the pix box, but couldn't. Then, I went to che...

How could I configure my Pix to allow a Terminal service session throught my Pix using an HTTPS? Some of our clients had some problems using VPN in Hotels. They started to block the vpn ports.

I am not able to establish IP connectivity between 2 LAN's. Pix with no outbounds restricts forwards traffic via ISP "A" and the return traffic comes in through a router on the LAN via ISP "B" I am able to ping and trace to the relivant servers but u...

Hi... hope you can help me,I have this problem...SecureRemote--------PIX Firewall------FW-1 FirewallClient(LAN user)I have some LAN users who has the Secure Remote Client from CheckPoint to connect by a VPN tunnel passing throught the Pix Firewall to...

I was just given a PIX 520 with an old configuration that needs to be removed. Anyone know of a quick way that I can erase the current config so I can start with a clean slate?

I wanted to know if I have to permit PC any where through PIX which Port on the PIX has to be opened.Thanks.

Hello.We've got a pix installed without its failover unit, and last day due to a network failure, it passed to standby state and trying the nonexisting failover unit to take over control. We solved the networking problem but the machine stayed in the...

i want to upgrade my pix(525) software from 5.2(5)to 6.1,here i have some question,please help me 1.how can i fetch my old pix ios from pix?2.what is the best way to up my pix software from 5.2(5), copy tftp flash mode or from monitor mode? 3.if i fa...