Nexus Dashboard

Nexus Dashboard incorporates Nexus Insights, Network Assurance, and Multi-Site Orchestrator, as well as seamless access to network controllers and third-party tools and cloud-based services.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Forum Posts

I am trying to use the NDFC API to create some networks (I have a lot to create and am trying to automate).Creating networks from the GUI is straightforward. (In the fabric -> Actions -> Create Network)But from the API, I basically can't figure out h...

bunjiega by Level 1
  • 1924 Views
  • 2 replies
  • 0 Helpful votes

Hi All, Anyone had tried Nexus Dashboard 2.2(2d) with Nexus Dashboard Orchestrator 4.0(2i) on DevNet Sandbox and than push configuration such as EPG, BD and VRF from NDO to APIC. I tried and always got error "Template Deployment Failed - code: "182",...

dchochan by Level 1
  • 952 Views
  • 1 replies
  • 0 Helpful votes

i team, i have cisco 9504 nexus switch and i want access the switch gui but i am not able http or https running IOS :: NXOS variable = bootflash:/nxos.9.3.11.bin module :: N9K-C9504  i was trayinh to run comman but not taken ::feature http-server err...

Is there a trick to changing the interface policy from the NDFC? I want to change this from a trunk to an access port. Seems like this should be simple.I am under the interface, but there is no drop-down to change this to an access-port. LAN-->Fabric...

JeremyHalcomb_0-1671565187564.png
bunjiega by Level 1
  • 1941 Views
  • 2 replies
  • 0 Helpful votes

Hi all,I've just had a specific question, "Is Nexus Dashboard FIPS compliant?"I can't find anything in the documentation. Any help and assistance in answering this question would be greatly apprechiated. Thank you.

Liam S by Level 1
  • 493 Views
  • 0 replies
  • 0 Helpful votes

Here is the link of the tool https://www.cisco.com/c/dam/en/us/td/docs/dcn/tools/nd-sizing/index.html Does not matter if I select the virtual or physical appliances for the Nexus Dashboard in the "Cluster Form Factor" section, I can not seem select b...

SIMMN by Spotlight
  • 1481 Views
  • 1 replies
  • 0 Helpful votes

Hi,I'm going to deploy some Nexus Dashboard physical appliances to manage our VXLAN fabric (a preprod one with only 1 Spine and 2 Leaf)I have a few questions regarding the Data interfaces of ND:how should I physically connect them to the Fabric? I ha...

suneq by Level 1
  • 648 Views
  • 1 replies
  • 0 Helpful votes