I am having an issue with ports 1-4 and 25-28. It's kind of weird how these ports are showing off on PoE and they are lined up with one another on the switch. All other ports are enabled and show searching or on. The firmware is 1.2.1.5, which is the...
Hi everyone,I'm in need of some assistance with my Cisco UC320W units. I have a production unit currently running firmware version 2.3.2(6), which has been facing issues with frequent reboots. To address this, I'm planning to set up a backup unit; ho...
The operating voltage mentioned for the CISCO Power module PWR-C6-125WAC/2 is 100-240VAC.We would like to know what is the tolerance band for voltage above 240 240VAC. ( For example: +-5%, +-10%, etc.).This power module is used in CISCO L2 switches C...
Current SituationWe are encountering an issue with the network topology. The setup consists of 10 switches, all running firmware C1200-24P-4G and using the same model (C1200-24P-4G). These switches are organized into two clusters:Cluster 1: 7 switche...
Having a remote-syslog-server configured there are fields missing in this output - compared to "show logging" on the switch.Here are two examplesSwitch: 31-Dec-2025 13:38:42 :%LINK-W-Down: gi931-Dec-2025 12:34:40 :%STP-W-PORTSTATUS: gi4: STP status F...
I cannot seem to reset my CBW 150AXHave tried factory reset 2 times.Keeps blinking green.The other APs on my network are ok
I’m managing a small business network that supports internal users along with a public-facing website modernfoodcatering.com, and we’re seeing intermittent latency spikes during peak hours. The setup includes a Cisco ISR router, Catalyst switch, and ...
Hi Team, For one of our customer Stealth watch service not workings Can you please help I can provide the serial number
In a spine-leaf data center fabric deployed in a high-security banking environment, where is the optimal placement for Border Leaf switches, and what external devices should connect to them? Additionally, what specific hardware features, software cap...
I have an SPA122 with its WAN port connected to a fibre wi-fi router's LAN port. I configured the SPA122 using 192.168.15.1 with the LAN port connected directly to a PC. I have set a new admin username and password and enabled remote access. I can se...
I just received a new SPA525G2 phone, when booted the admin section is not visible through the web interface. When trying to access http://w.x.y.z/admin I receive a 403 Forbidden. When trying to factory reset, nothing more happens.It seems that it wa...
Dear Community...I'm trying to configure a CP3905 for the first time. My TFTP Server is ready yet and all terminals are correctly configured and are reaching TFTP Server properly.However I'm in trouble regard the necessary files to be uploaded at fir...
お世話になっております。無線APがLocalモードの場合、ネットワークスイッチのshow mac address-tableの実行結果に無線クライアントのMACアドレスは出力されない認識なのですが、FlexConnectの場合は無線クライアントのMACアドレスが出力され、flappingを示すログが出力されていました。以下についてご存じの方いらっしゃいますか。①FlexConnectモードの場合は、無線APを接続しているネットワークスイッチのshow mac address-tableに無線クラ...
I need help with CML-Free. There are no routers or nodes (PCs) in the dashboard.
Hello,I have a new installation of a 140 that is up and running via the iphone app. I am looking to be able to set up an app on the company server to monitor it since i am not on site. Does anything exist to monitor the AP ?
