How to make <URL> on <CiscoIPPhoneText> to call a phone number when user pick up the phone and pass querystring information when user press one of <SoftKeyItem>?Thanks!
Hi every body ..I have a uc500 with bulit in fxo ,,. i have connect to the FXO 0/1/0 an Ericsson Fixed Wirless terminal ... the ericson work like this ( you put a GSM SIM card on it -your mobile SIM for example- then you connect it to fxo port with y...
Hi there we have 2 (Publisher & Subscriber)CM 4.1.(3) sr4b with EM configured.Both Pub & Sub are in different buildings. Distance is about 5 km. The link between both buildings is 200 Mbps. Both Cm's are in different lan's with different IP's.On norm...
Hi,We have 2 x 4506 switches & phones plugged into both in voice vlan 220.Vlan 220 is trunked between both switches.We have a Nice recorder with one span NIC, which plugs into switch one Gi2/8.I have the below config on switch 1.monitor session 1 sou...
Hi, I have a 2801, with 5 phones 7940 and 2 phones 7970 but suddenly only one of the 7970 is rebooting every time and never start. In a sesion of telnet the comand show ephone give me this: ephone-2 Mac:001B.54CA.D640 TCP socket:[-1] activeLine:0 DEC...
Hi all,I knew "answer-address" point to calling number (ANI) but not sure why "answer-address" keywword was chosen by cisco. Does anybody know why? The only reason I am asking is I wanted to "memorize".Thanks,
Our sys admin is out on vacation and I've been charged with changing the system greeting for outside callers. I work at a small community college. We have an alternate greeting that we use that gives summers hours and other info. I need to know ho...
Dear All,I' am experiencing an issue regarding the Music on Hold feature. It was working fine before, but suddenly it stops.I uploaded was file from "MOH Audio File Management" and the CUCM convert to the proper format successfully, and I added it fr...
Hello, We have recently installed CCM 6.1(1) with 7975 color phones. We are trying to display a custom image on the phones and are having no luck. Through the call manager OS Administration page I have uploaded the .png files for the image and th...
We recently upgraded from CM 4.1 to UCM 6.1. We had no set limit for ring types in 4.1 for individual lines. But after the upgrade, there is a limit of 7 ring types under each individual line. How can we put it back to where it was in the previous ve...
Hi,I have a requirment to display our company web sites in our IP Phone panel. My CCM is 5.1.2 and IP Phone models are 7970.How to display the web sites in IP Phone display panel?How and what configuration need in CCM server?My web site is running in...
Dear All,When trying to login to the Cisco Unified CallManager User Options page through this link https://CUCM_IP:8443/ccmuser/showhome.do and entering the userID and password i got the following error in the attachment Kindly Advice...
