I'm trying to upgrade ios software for my switch WS-C2960G-24TC-L from 12.2(55)SE9-LAN-BASE-CRYPTO to latest 15.0.2-SE7(MD)this is the status message :Uploading the image.Uploading the image; this might take a few minutes/seconds...Failed to execut...
Forum Posts
Resolved! Anyconnect stops LAN printing on a Mac
Hello, I'm just a home user of Cisco Anyconenct. The software is provided via my institution's website. The name of the most current installer is anyconnect-macos-4.4.03034 -core-vpn-webdeploy-k9.pkg. (in case it is important to know)After really a y...
Hello.We use ASA 5540 with 8.2(1) (we can't update it).I have configured netflow with commands:flow-export destination inside 192.168.1.93 9997 flow-export template timeout-rate 1 policy-map global_policy class flow_export_class flow-export event...
Is VPC peering allowed between different nexus chassis. for example I have a N9K-C9372PX-E and N7K-C7010 with N7K-SUP1. Can these be peered?
How bad is my english? :o
Hello,I was wondering if there is a way to monitor the packets going through specific ports or IPs on the Switch.MORE INFORMATION:We have a PTP GM200 clock setup broadcasting a PTP signal at 192.168.1.231, we are using an Emergent Camera at 192.168.1...
So I just moved from a different state and switched from Charter to Cox internet. My old Motorola Surfboard modem died but no big deal I bought a Netgear CM500 and it connected to the internet no problem.The problem started when I set up my Cisco Lin...
Hi,I may be in the wrong discussion group, apologies.The company I work for will release Training Budget end January 2020. I was planning to cover my ICND 1, so I was studying for the exam prior to the course. Cisco have now moved the goal post and ...
I haven't worked with Cisco equipment in a while so I wanted to double check.Do you have to reboot an old production router after disabling Telnet? I'm pretty sure you don't have to but I wanted to double check.Thank you in advance.
What is the purpose of reflector port in RSPAN? Any differnence of the RSPAN command without reflector port defined?- monitor session 1 destination remote vlan 555- monitor session 1 destination remote vlan 555 reflector-port Fa0/10
Resolved! GNS3 - Slow Internet
Good eveningA simple scheme is presented in the following image, but my problem is about network performance. In my local network, I have 40Mbps, and when creating a virtual machine (bridge), without GNS3, I have done a speed test and it is correct, ...
Resolved! Cisco ASA 5515-X Dual ISP Load Balancing
We are looking at implementing two ASA 5515-X firewalls (with IPS) at our UK office. We are ordering two new ISP circuits 20/100mbps with two different ISP's.The business has requested that we load balance across both ISP links. The ISP's will manage...
Hi, How can I look at this policer real time values? ASR1001-X#show platform hardware qfp active feature subscriber session id 1426278251 feature policing Policing Session Info: Policing Ingress Config: rate: 6553 peak rate: 0 bc: 98304...
Studying for ICNDI exam. Came across this question:COREZ has been configured to send its configuration file to the TFTP server every five minutes. What is the IP address of this TFTP server?10.10.10.19910.10.10.20210.10.10.20010.10.10.201 It says ans...
Hi, We have created an test environment with a Cisco 7604 with SIP-400 and 2xGE SPA authenticating against freeradius with radius. Customer routers are authenticating with PAP over PPPoE. So far everything is working perfect, the only thing i can't f...
