Is it possible to see the match count against QOS ACL with PFC QOS configured on Sup1A/PFC?with "show qos acl" command options, I could not find any match count.Is it possible to check the match count from Cat OS?
hi, i have several peerin connections with isp's, utilized by sites i am hosting. I want to see the bpson each link per site, ie, how much of the traffic is launched by www.mysite1.com, www.mysite2.com etc..some of the sites are virtual hosting resid...
need assistance. have two routers at the headend, core1 and core2. both these core routers connect to a common backbone switch and are running OSPF. a remote site has a single router with a separate pvc (pvc1 and pvc2)to each of the core routers. I n...
Has anyone experienced a problem with running out of RAM on a PIX firewall? I have a 515E with 64MB of RAM running version 6.3(1). This firewall has been up since March with no problems. Today I had users complain that they could not establish con...
Running Windows Xp SP1 try to access a brand new SOHO 91 with IE6 and java version "1.4.2_05"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04), but the next window hangs with a message "Loading Cisco Router Web Setup. Please wait....
does anyone know why when I enter a command into my router it does not register in the router config? i do the following command - and then when i do a "show run" it does not appear.config trouter ospf 1111network 10.117.254.84 0.0.0.3 area 55
Easy questions.. I have a layer-2 network comprised of a 3550-12, 3550-24, and a 4006. The 3550-24 and 4006 are connected to the 3550-12 via Gig-E. All one broadcast domain, not routers on the network. Question 1: Is there anything I need to conf...
Hi, I have a question about the impact of activating md5 authentication.I would like to activate md5 authentication across a single area. If I change only 2 adjacent routers from the 8 or so in the whole area, they refresh their neighbor and adjacenc...
Lately one of the Cisco Catalyst 4506 switches here at my site has been experiencing an interesting phenomenon in which the switch will crash consistently at a certain time during the day and recover automatically by itself. During the crash all the ...
I'm a bit new to inter-vlan routing. I'm inter-vlan routing on a 6509/msfc2. Until now, all our servers were on same vlan as dns/wins servers. I created a new subnet/vlan and placed a Win2k server in this new vlan. I've no problem connecting to resou...
HiWe have a LAN that consists of clients with 2 range of private IP addresses, namely 10.1.1.0 and 192.168.1.0 with subnet mask 255.255.255.0. All clients are connected to five CISCO Catalyst 2950 Series Switches which are cascaded.I do not want 10.1...
HiI want to prevent the spread sasser and blaster at the network layer in my Cisco routers .What commands do I key in to get this done?Please help .This is urgentthanksShiva
