Other Network Architecture Subjects

I have two Cisco 1600 routers is there any way to assign a single public IP to one and have it communicate to any endpoint on private network. Is there a flag option that I could assign to each private IP that I need to access?I.E. xxx.xxx.xxx.xxx:z...

Can anyoine tell me what the difference between these two MSFC IOS releases? One has a dsv and one has a psv in the title. I know it has something to do with redundancy but what I found so far is unclear:c6msfc2-dsv-mz.121-13.E10.binand c6msfc2-psv-m...

I would like to know if the 'summary-only' tag is used on a couple BGP aggregate statements with one being a /16 and the other a /22 will both routes be advertised? I am of the impression that only the /16 would be advertised and because of the 'summ...

I am curious as to what IOS version I would need to allow the module, mentioned in the Conversation Title, to function. The router the company owns is a 3640 with IOS version c3640-ds-mz.122-2.T1. Do I need to upgrade to 12.3?

Hello,If I do anything on CW under the Campus Manager tab (e.g. Topology service, path analysis, user tracking, vlan port assignment) using the browser on my pc (xp, ie 6.0) it never actually full loads the screen. It opens a small window saying Conn...

Can anyone find a compatibility matrix that shows the recommended CatOS/IOS images to install on a 6509 in hybrid?For instance, I install 7.6.1 as the CatOS, what IOS can I run on the MSFC1 and know that it has been tested to be compatibilty with 7.6...

I am implementing a full T1 and do not want to purchase an external CSU/DSU unit (due to cost).Are there any benefits to using an external CSU/DSU like an Adtran compared to an internal one?Would the WIC-1DSU-T1 be the card i would need for a 2611 ro...

We have a metropolitan Ethernet-access working with one DCHP server who centrally manage the IP address assignments for a large number of subscribers. When some one put another DHCP server on the same ethernet with free leasing, the other subscribers...

Hi,i need to use Rtr track command in my 801 Isdn Router.This feature was introduced in Cisco IOS® Software Release 12.3(4)T but i don't be able to find this release for 801 Router.Please let me known if release 12.3.9 or any other release support Rt...

Hi AllWe are working into a project where we have to improve performance of a Lotus Domino application over Local are network. We have checked the utilization network switches and monitored the ports for erros but everything seems to be working fine....

What is the difference between Basic L3 and Enhanced L3 in IOS?

If somebody know how to upgrade the firmware and software version for Catalyst 6509 Supervisor Engineer II

Hi,It is required to integrate CW LMS with crystal reports. Can anybody tell me what is the procedure fro this. I have installed the Crystal reports and the server is recognising the ani.db & rme.db in the same server. While trying to connect it does...

Cisco 6509 CATOS 6.3(7)I have etherchannel configured on dot1q (desirable)trunk on the switch. When I change the etherchannel mode from "on" to "desirable" on one side of the trunk, the port was reset. Is there any workaround to avoid this port reset...