Resolved! Suffix K9 on routers
On a lot of CISCO routers there is a suffix K9.what is the mening of it?
On a lot of CISCO routers there is a suffix K9.what is the mening of it?
Hi, I have 3 WAP321 Wireless Access Points in my system, my problem is they work fine for couple of days and after few days clients see the SSIDs the APs broadcasting however none of the client are connecting to the APs. Sometimes one of the APs work...
I used the built in design and deploy templates to apply OOTB Medianet - perfMon. I see the configuration did apply to the router, but I am not seeing any netflow data to prime. How do I troubleshoot/debug this issue.
I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the in...
5672UP - Todas as 48 portas deste switch possibilitam utilizar os protocolos Ethernet, Fibre Channel e FC over Ethernet ? 5672UP - All 48 ports of this switch enables use Ethernet, Fibre Channel over Ethernet and FC protocols ?
For Multlink interface ,MTU size is set to 1500,but able to ping upto 9000.How???Multilink is bundle of 2 E1 in chanellized STM-1
Hello, I am studying PIM Sparse mode and start working on AutoRP. I have a small topology consist of 6 routers which are connected over FrameRelay point to point. I have tested this topology using static RP assignments and is working as expected. No...
I have two Cisco 5510 Firewall version 8.2(1) configured in HA in Active and Standby mode.IF i will shutdown interfaces on the Active firewall of DC islolating it from network infrastructure and Make standby DR firewall as active by allowing traffic...
I have two Cisco 5510 Firewall version 8.2(1) configured in HA in Active and Standby mode.IF i will shutdown interfaces on the Active firewall of DC islolating it from network infrastructure and Make standby DR firewall as active by allowing traffic...
tomorrows the big day! i take my incd 1 and am equally excited and nervous. today i was taking wendell's practice test and kept stressing out about the time limilt, i actually had to stop one practice test and walk away because i was missing EASY que...
Pulling my hair out a bit trying to figure this out. I feel like I'm OK going from the EHWIC to the WAN side, but can't seem to figure out what to do going to the phone to assign voice traffic to LLQ. There's no "priority" command available as on mos...
What is the cause of this error message?What is the solution to this problem ?Thanks
I am kind of new to QoS, purposefully avoiding it as long as possible. I have read the design guides and have a few questions.1. Is one way QoS a good thing? Or should it be bidirectional? example: I am marking traffic between two hosts as AF21, the...
hi, just want to ask if anybody has experience creating cisco deal id? i just want to know how to create a deal id. since im currently employed in a cisco reseller and one of my roleis to create bom in yagna iq and create for a deal id. thanks
when i try to connect the to Cisco Catalyst 3500 swicth through hyper terminal,it display upper screen .someone can help me?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-07-2024 07:08 AM | ||
09-26-2024 02:28 AM | ||
08-07-2024 06:15 AM | ||
07-17-2024 11:08 AM | ||
05-29-2024 04:52 AM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 | |
1 |