Hi. I am trying to put together a package for a customer of mine. I just got signed up at a Cisco Partner. Currently they have a 2811 router and a 2504 WLC. The 2811 is noisy and just doesn't work right. I'm looking at a 1921 with a SRE w/ WLC softwa...
Hello,I have 4 different fiber network feeds coming in from different buildings / closet into a room.. from that room a 24 strand fiber runs to the datacenter.All the fiber is MM 62.5. So lets say I want to run patch cables from each of the fiber pat...
I am trying to telnet to a router that is configured with a BRI interface (using Ip Unnumbered Ethernet 0) and Ethernet 0 (exampe of ip: 200.200.200.200). The result when I telnet to 200.200.200.200 is:Could not open a connection to host: connection...
Please I need help on understanding the type of VPN to use for my network remote connection.We are planning to setup all our branch offices to use the HQ network and share resources. We plan to deploy a unified communication of BE3000 from HQ over Ci...
Hello,I just received a 1812 model unit flash memory C class.I cannot free the space from CF; after format, I receive the same amount of space:Cisco-1812-II#show flash:14450688 bytes available (17489920 bytes used)Cisco-1812-II#format flash:Format op...
Hello,can you tell me what is the "ingress over sub drops" counter in the following output (ASR1004, 15.2(2)S1)?asr#show controllers <...>TenGigabitEthernet0/1/0 21830397 input vlan errors 7712082 ingress over sub drops 18 Number of sub-i...
Last year we had a glut of resources. I purchased a 5508 WLC with a (50) AP license, (12) 1042 APs, and (12) 3500 APs. We already have 6 APs in the field run by a 2106. What I would like to do is supply wireless access to all of the laptops and iphon...
Hi.I've been reading the forum and the net trying to get a straight answer on this and can't seem to find anything concrete.So basically If I have a CBWFQ setup for three classes, af3x (55%), af2x(30%) and class default(15%). applied outgoing on a WA...
We had a fan fail on our 3845 edge router. No big deal; the other two fans kept the temperature easily within spec, and the module is a two minute hot swap. I opened a ticket, they sent me a replacement. Simple. (In fact, the router install docs note...
Hello,I am trying to setup a redundant , High available OSPF network. Pls see attached.The switches are also running OSPF instances with Routers, on both Primary and Seconday path. Do i need to setup OSPF peering between switches also (over the trunk...
Hi there,I was wondering what is the difference between GLC-SX-MM and GLC-SX-MMD.Cisco website says that MMD is with DOM, kindly help me understand what it is.Thanks,Ram
