I am having an issue with Cisco 3524 switches and CAT5E or enhanced patch cables. I show connectivity lights but cannot pass data. ( Obtain an IP address). I know the fix ( use different patch cables) any idea why?Thanks in advance.
Hi, I`ve 2 switches 2950, I would like to separate 2 networks in VLANs. I have a FW linux as router.It`s possible these?I know that I need a switch 5000 or 6000 (ISL) and a one router cisco (isl).Could you explain me?TxA
Hi,I have 2 routers : 1 2501 and 1 3640, and 2 64 Kbps ppp Links between this routers, I wanna do a load balance between this 2 links, someone told me to do I load-sharing but what kind of load-sharing I must use to connect the 2501 and 3640, the IOS...
Hi!I have next problem: boot: cannot determine first file name on device "flash:"I don't have copy of file in flash device. Can you help me,please. Thanks.GB
Is there a "best practice" for changing the admin distance of a route redistributed from BGP into EIGRP? I have a couple routes that are redistributed into EIGRP using route-maps. There is no specific "set" option to change the distance of the redi...
HI .. I am looking for the basic config that would allow and ATM could to connect to a frame-relay network .. ( Example we have serveral areas that have frame-relay t1 service it is now comming back to us on another frame-realy-t1 conection ( 7-1 rat...
Does anybody know if there is any kind of restriction to redistribute (OSPF) an ip network that is configured as secondary on an ethernet interface. I mean it works fine just using the network command? It works fine using redistribute connected comma...
Hello everyone, we just bought a 1720 series router for a remote site, it's a 56k to the router, we use eigrp etc. The problem is the serial is up, up but the fastethernet0 is up, line protocol is down. The interface has an ip address, no ip direc...
Hi Sir, first of all thanks for your kind assistance. I have the following queries, please help out;(1) I have a 3620 router with 3 ethernet ports meant for internal server routing purpose, say I have a subnetA (Class A) network , subnetB(Class B) ne...
Hi all,I'm trying to install this new pa on a 7206 VXR using the last ios 12.2(8)T4as suggested from compatibility matrix, but the port adapter doesn't appear in the show version and and in show run.On the show diag the port adapter seems to be roco...
6509A---------------6509B | | | | --G0/1-3524---G0/2--- 1¡¢6509A is root of spanning tree 2¡¢The ACTIVE gateway of 10.1.7.0 is on 6509A,and STANDBY is on 6509B 3¡¢G0/1of 35...
Present setup the second 7507 is OFFNeed to configure 7507 Wan port's which is Ethernet and connected to 7200 router and 7200 is connected to T1 to pivate remote offices.3 ethernet ports are used on 7507 for LAN and connected to 6506 serving 3 diff...
Hi anyone can help out is there any sample configuration on ACL for router 3620,2610 and etc with diagrams and command reference explainations ?Please help out.
