For some cisco devices the console setting is 9600bps,8data,1stop and no parity.And some have the stop bits alone different as 2bits.Whats the reason.Thanks.
Using 2 ip helper-address entries configured (on one interface) to point to 2 different DHCP servers. Could someone confirm that the first entry will be used and that the second would be used only when the first server no longer respond (scope empty)...
I'm new here, so forgive me if this is the wrong forum. I've been tasked with finding rack space requirements, and could find nothing on Cisco's web site. What is being purchased is a Cisco 1720 Router, along with a Cisco 1pt want serial module (this...
HelloI have a couple 3com superstack II connected to a Cisco UBR900 router at etherneted location. I was told to create a static NAT entry for some ports For uploading puposes I am completely clueless on how to do this, and so is the ISP (they're ...
Hi,We have a fractional T-3 (18Mb) and we're thinking about bringing in one of our subsidiary's online systems in-house and hosting it for them. How can I measure their bandwidth utilization for billing purposes? It doesn't have to be exact, an avera...
I want to restrict the multicast entering my LAN ( I 'm not using any multicast applications). I don't want to receive the multicasts intended for the routers also. ( The setup is a 100% cisco site, with switches and routers)Pls give me a soln
When opening Lotus Notes attachements we get the generic error of "operation did not complete in a resonable amount of time". This point you to a network timeout. The WAN link from this site to the site that contains the Lotus Notes server is a 56K...
Do I have to use the GB port connection to my router interface or can I use one of the 48 10/100 ports? Would this create any problems? Not sure the money will allow upgrading the router ports at the same time but don't want to buy into older tech....
Hello,As I use 6509 DHCP services to support multi-vlan, when one user log on domain in one vlan using windows 98 platform, after he move the pc to another vlan he can not get IP and log on the domain again, even have already set 'portfast'. Only use...
Hello,everyone I have a question about Cisco2621 router.I have onereal IP address ,I want to publish WEB server and allclient of internal network can access the Internet. Can I use Cisco2621 router do this? ...
I have 2 3660 routers with 12.1(5)T5 IOS version.I performed full BGP with 2 ISP's. Now, every 60 seconds, the CPU's routers jump to 50%-60% utilization on BGP Scanner process by "sh proc cpu".Does anybody know what is this process?
I have 2 7206's, one of them is not pushing the advertisment for one of our blocks, though it is in as a network statement and I can advertise all the other blocks.
Hi i have a router configured as follow:isdn switch-type basic-net3!!process-max-time 200!interface Ethernet0 ip address 192.168.0.2 255.255.255.0 no ip directed-broadcast ip nat inside no cdp enable!interface BRI0 no ip address no ip directed-broadc...
Hello there !Ok actually in my network I have the following, a router Cisco 802 with a connection to the Internet of 128kbps, a Local Area Network with a subnet of 192.168.1.x. My issue is I want to put an ISA Server (Microsoft) inside of my LAN. I f...
